Multifunction Meter CX-601 
FT520 Batch Flow Processor 
PC-3310-RS Intelligent pH/ORP Transmitter 
ORP2000 Extended Life ORP Sensor 
EX800 Series Related Products
Quick View
SoliSense®
Key Benefits
- From 2 NTU to 8% Solids
- Displays in NTU, mg/l, g/l or % solids – flexible
- Auto-clean optical sensor – months without maintenance
- Stable and reliable – excellent process control
- Suitable for all potable, waste and process waters
- Up to 12 months between maintenance
- Up to 12 months between calibration
- Less spares – more commonality across a single or multiple sites
- No requirement to know the range prior to specifying – easier purchasing
- One online suspended solids analyzer can be:
- Online mlss meter
- Online tss meter
- Online total suspended solids meter
- Online effluent monitor
- Online inlet monitor
- Online ‘in process’ suspended solids analyzer
Quick View
AquaSense
Swimming pools and spas use chlorine as a disinfectant and so use an analyzer to control the amount of chlorine that gets dosed. The AquaSense Swimming Pool Controller and Spa Controller measures the pool chlorine levels and the pH of the pool and then controls the chlorine and pH levels by controlling the chemical dosing. The AquaSense offers bufferless and reagentless operation and is suitable for commercial, municipal and community swimming pools.
The AquaSense has been designed to three criteria:
- Improved Safety – better sensors lead to better process control which leads to less variation in chlorine residuals even with highly variable bathing load.
- Improved Control – better process control leads to reduced chemical usage, lower costs and an improved bathing experience.
- Reduced Costs – lower chemical costs, less expensive controllers, inverter control leading to hugely reduced electrical usage costs are just a few of the ways that the AquaSense can save you money which can pay for a new controller in just a few months.
Key Benefits
- Inverter control for massive electricity and CO2 savings
- Stable and reliable residual chlorine and pH measurement and control
- Low purchase cost
- Low cost of ownership
- SMS text alarms
- Remote access via Internet
- Suitable for fresh water, salt water and outdoor pools with cyanuric acid
- Private label option for re-sellers
- Other inputs to data log and alarms
Quick View
pH2100 Flat Tip Plastic pH Electrode
Product Description
Agar plates, skin, and electrophoresis gels are all surfaces that may be difficult to measure with a typical pH glass bulb due to concerns about breakage. To facilitate these and other surface measurements, we created the pH2100 flat tip pH electrode. It has a rugged flat measurement surface, which breaks less easily when it comes in contact with hard materials. This makes it a great choice for measuring slurries, sludges, and viscous samples as well as those containing suspended solids.- Ideal for surface measurements and slurries: rugged flat measurement tip resists breakage
- Great for testing unknown sample types: double junction electrode reference design prevents contamination
- Durable and Versatile: Ultem® body offers enhanced chemical compatibility and booted BNC protects meter connection
- No maintenance required: sealed gel filled reference design
- One year limited warranty: We stand by our products with the Sensorex guarantee
Quick View
pH1400 Light Duty Glass pH Electrode
Product Description
Whether you are a student measuring pH in a lab or a business owner monitoring plant or crop health, you need a pH probe that will consistently deliver accurate measurements. If you deal with a wide variety of chemicals or any aggressive substances, a glass pH probe like our pH1400 is a safe choice due to the chemically inert properties of glass. This basic, single junction electrode has a refillable reference cell, allowing users to maintain measurement precision throughout instrument lifetime.- Accurate measurements across full pH scale (0-14)
- Easily maximize measurement repeatability: refillable reference cell with liquid solution
- Maximum chemical compatibility: glass probe body is inert to most reactions
- Compatible with a variety of pH meters: use this probe with any pH meter accepting BNC
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Quick View
ORPSense
Key Benefits
The ORPSense range of ORP Meters from Pi utilize the very latest and best ORP sensors available in the world today for measuring the online Redox potential of any aqueous solution. They are platinum ball based sensors with integral reference electrodes which use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs. Online ORP meters and ORP controllers are one of the most common analyzers in use today in water treatment and process plants and yet online ORP meters cause continual problems for their operators. What is needed is a stable, reliable, online ORP meter for a reasonable cost. That is exactly what you get with the ORPSense and the ORPSense Automatic Calibrator. The ORPSense sensors and flow cells are available with different controllers giving you the same great performance with different communication, display, and control options. With the ORPSense range of ORP meters, you get everything that you need – and nothing that you don’t.-
Stable and reliable ORP meter
On board diagnostics
Low purchase cost
Long life ORP sensors
Remote access and SMS text alarms
PID and other process controls
Quick View
FluoriSense
Key Benefits
Pi’s FluoriSense range of fluoride monitors and fluoride analyzers utilize the very latest and best fluoride sensors available in the world today for measuring the online fluoride content of any potable water. They are ion selective electrodes (ISEs) with integral reference, automatic temperature compensation and solid polymeric junction. which use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs.- Measuring method: ISE (Ion Specific Electrode)
- Measure range: 0.02 ppm saturation
- Sample pH range: 5 to 7 pH at 1 x 10⁻⁶ M / 5 to 11 pH at saturation
- Temperature range: 0 to 80°C continuous / 80 to 100°C intermittent
- Electrode resistance: less than 50 MΩ
- Reproducibility: ±2%
- Cable length: 100cm
- Calibration: Manual using test kit
- No reagent required
Quick View
OzoSense
The OzoSense Online Dissolved Ozone Monitor from Pi for the measurement of the ozone concentration in water, is designed to be simple to install and operate, and offers unrivalled stability, accuracy and precision, whilst offering excellent value for money.
The OzoSense range of online dissolved ozone analyzers and dissolved ozone monitors utilize the very latest and best ozone sensors available in the world today. There are two sensors in the OzoSense range. The first is a membraned device which is insensitive to changing pH, uses no reagents, is extremely stable, and has reduced maintenance and reduced whole life costs. The second is a non membraned three electrode sensor, that can operate at higher temperatures and pressures.
Key Benefits
- Stable and reliable – excellent ozone process control – ozone controllers
- Suitable for all potable, process and salt waters – ozone monitor – ozone analyzer
- Up to 6 months between maintenance
- Up to 3 months between calibration
- Does not respond to residual chlorine (OzoSense M)
- Resistant to detergents in the water
- Up to 70°C (OzoSense NM)
- Onboard PID controls – dissolved ozone Controller
- Onboard data logging and graphing capability
- Onboard comms such as TCP/IP, Modbus, Profibus and more.
Quick View
pH3400 Research Grade Glass pH Electrode
Product Description
In laboratory environments such as medical, biological, and materials science research groups, samples and test conditions are constantly changing, but accuracy is always critical. The pH3400 is a highly versatile glass combination pH electrode, specially designed to respond quickly and accurately to rapid temperature changes. The high sensitivity internals allow testing of low ionic samples. Safely measure samples containing heavy metals, TRIS buffer, or proteins thanks to the double junction reference design, which prevents fouling. Even test highly reactive chemicals: with a glass body, the pH3400 is inert to a wide range of chemical reactions.- Our most sensitive laboratory electrode: accurate to 0.04 pH in tests across full recommended temperature range
- Easily maximize measurement repeatability: Rapid renew reference system for quick refilling
- Safe for use with reactive chemicals: Glass bodies are inert to many chemical reactions
- Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
- Ready for wet or corrosive environments: BNC boot protects meter connection
Quick View
pH1000 Polycarbonate Laboratory Plastic pH Sensor
Product Description
Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. This low maintenance, low cost pH sensor provides reliable readings in a range of environments, from greenhouses to science classrooms. This sensor stands up to the usual wear and tear with its durable polycarbonate body and built-in protection for the pH glass measuring surface. Compatible with all pH meters accepting a BNC connector.- Very fast response time: Platinum measurement surface for fast response time and stable readings
- No maintenance required: Sealed, no maintenance reference design
- Durable construction: Polycarbonate body is built for frequent lab or field use
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Quick View
ORP1000 Polycarbonate Laboratory ORP Sensor
Product Description
The ORP1000 is a durable and easy to use ORP sensor. Great for outdoor applications, such as monitoring swimming pool chlorine, this probe has built in protection for the ORP sensor surface. Use the ORP1000 with any ORP meter accepting a BNC connector.- Very fast response time: Platinum measurement surface for fast response time and stable readings
- No maintenance required: Sealed reference design requires no refilling
- Durable construction: Polycarbonate body is built for frequent lab or field use
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee