Navigation

Primelab 1.0 Photometer

‹Return to Previous Page

Related Products

Quick View

UV254Sense

Key Benefits
  • UVA (ultra-violet absorbance) is an excellent surrogate parameter for TOC, DOC, COD and color.
  • UVT (ultra-violet transmission) allows for the calculation of optimal UV dose for disinfection systems, improving efficiency.
  • Accurate detection without the cost of reagents.
  • Few ongoing service or maintenance requirements.
  • Allows feed forward optimization of coagulation control, resulting in decreases in chemical consumption, reduction in sludge removal costs and minimization of DBP formation potential.
  • Strong ROI with pay back on the analyzer being seen by many customers within a few months.
  • UVA measurement ensures performance of various contaminant removal technologies such as membranes (RO, NF, UF), ion exchange (nitrates and TOC removal) and granular activated carbon (GAC).
  • Real time UVA analyzers can provide a final check of effluent water quality and can alarm an operator in case of non-compliance.
  • A UVA monitor can monitor the percentage removal of organics across any treatment system.
  • Can be combined with a CRONOS® or CRIUS® for a multi-parameter UV254 analyzer solution that suits your needs.
  • Standard Features
  • Online continuous operation
  • Patent pending Ortho-Beam technology
  • 254nm wavelength UV light source
  • Displays UV transmittance or absorbance values
  • Quick View

    PC-110 pH/ORP Panel Meter

    Compact and Pragmatic
    The PC-110 pH/ORP monitors utilize microprocessor technology to provide you enhanced capabilities with economical price. The compact design fits in small space installaion. The PC-100 features for sample monitoring and the PC-110 offers one relay output to sufficiently activate your process system.
    Applications
    Water treatment Pure water System Clean room Wastewater treatment Scrubber Electronics process
    Features
    1. 48 x 96 mm Microprocessor pH/ORP Monitor & Controller
    2. Sensor slope performance diagnosis & error message
    3. User-friendly operation
    4. Automatic temperature compensation
    5. Compatible with Pt-1000 and NTC 30K temperature probe
    6. Isolated current output DC 0/4~20mA
    7. Gradually continuous sample measurements average function to enhance stability
    8. PC-110 offers one relay contact output, one set point with programmable hysteresis function
    Quick View

    SoliSense®

    Key Benefits
    • From 2 NTU to 8% Solids
    • Displays in NTU, mg/l, g/l or % solids – flexible
    • Auto-clean optical sensor – months without maintenance
    • Stable and reliable – excellent process control
    • Suitable for all potable, waste and process waters
    • Up to 12 months between maintenance
    • Up to 12 months between calibration
    The SoliSense® suspended solids sensor is available with different controllers giving you the same great performance with different communication, display, and control options. With the SoliSense® range of online suspended solids analyzers, you get everything that you need – and nothing that you don’t, without sacrificing the quality of measurement. The use of a single sensor to robustly and accurately measure a large dynamic range of suspended solids allows for:
    • Less spares – more commonality across a single or multiple sites
    • No requirement to know the range prior to specifying – easier purchasing
    • One online suspended solids analyzer can be:
      • Online mlss meter
      • Online tss meter
      • Online total suspended solids meter
      • Online effluent monitor
      • Online inlet monitor
      • Online ‘in process’ suspended solids analyzer
    Quick View

    PC-100 pH/ORP Panel Meter

    The PC-100 pH/ORP monitors utilize microprocessor technology to provide you enhanced capabilities with economical price. The compact design fits in small space installation. The PC-100 features for sample monitoring.
    Applications
    Water treatment Pure water System Clean room Wastewater treatment Scrubber Electronics process
    Features
    1. 48 x 96 mm Microprocessor pH/ORP Monitor & Controller
    2. Sensor slope performance diagnosis & error message
    3. User-friendly operation
    4. Automatic temperature compensation
    5. Compatible with Pt-1000 and NTC 30K temperature probe
    6. Isolated current output DC 0/4~20mA
    7. Gradually continuous sample measurements average function to enhance stability
    Quick View

    pH1400 Light Duty Glass pH Electrode

    Product Description
    Whether you are a student measuring pH in a lab or a business owner monitoring plant or crop health, you need a pH probe that will consistently deliver accurate measurements. If you deal with a wide variety of chemicals or any aggressive substances, a glass pH probe like our pH1400 is a safe choice due to the chemically inert properties of glass. This basic, single junction electrode has a refillable reference cell, allowing users to maintain measurement precision throughout instrument lifetime.
    • Accurate measurements across full pH scale (0-14)
    • Easily maximize measurement repeatability: refillable reference cell with liquid solution
    • Maximum chemical compatibility: glass probe body is inert to most reactions
    • Compatible with a variety of pH meters: use this probe with any pH meter accepting BNC
    • Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
    • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
    Quick View

    HaloSense Zero

    Key Benefits
    Many water companies want to measure free chlorine residuals without the need for chemical buffers traditionally associated with such measurements. Acetate and phosphate buffers are expensive and environmentally unfriendly. Buffer delivery systems are maintenance intensive and have fairly costly consumables and there are health and safety considerations in the handling of the acids and high disposal costs if the acid treated water is unable to be fed back into the water supply. Amperometric cells and most polarographic probes only respond to hypochlorous acid, (HOCl). HOCl dissociates into hypochlorite (OCl–) in a pH dependent manner. This is why most chlorine monitors need acid buffers in most applications. The typical pH of water measured on a water treatment works may range from 7 to 9.2. Chemical buffering reduces the pH to between 5 and 6 and ensures that the majority of the residual chlorine is present as HOCl (see graph below).
    • Low purchase cost
    • Low cost of ownership
    • Reduced pH dependency (largely pH independent)
    • Stable and reliable
    • Bufferless
    • Reagentless
    Quick View

    DioSense

    Key Benefits
    The DioSense chlorine dioxide measurement sensors and flow cells are available with different controllers giving you the same great performance with different communication, display, and chlorine dioxide dosing control options. The two controllers offer different options but both offer the same great user interface and Pi’s great quality.
    • Amperometric sensors – continuous online chlorine dioxide ppm measurement
    • No chemical reagents – lower cost of ownership
    • Stable and reliable – excellent process control
    • Suitable for all potable and process waters
    • Up to 6 months between maintenance
    • No interference from residual chlorine (DioSense M)
    • Tolerant of water containing detergents
    • Up to 70°C (DioSense NM)
    • Up to 6 Bar (DioSense NM)
    Quick View

    pH3400 Research Grade Glass pH Electrode

    Product Description
    In laboratory environments such as medical, biological, and materials science research groups, samples and test conditions are constantly changing, but accuracy is always critical. The pH3400 is a highly versatile glass combination pH electrode, specially designed to respond quickly and accurately to rapid temperature changes. The high sensitivity internals allow testing of low ionic samples. Safely measure samples containing heavy metals, TRIS buffer, or proteins thanks to the double junction reference design, which prevents fouling. Even test highly reactive chemicals: with a glass body, the pH3400 is inert to a wide range of chemical reactions.
    • Our most sensitive laboratory electrode: accurate to 0.04 pH in tests across full recommended temperature range
    • Easily maximize measurement repeatability: Rapid renew reference system for quick refilling
    • Safe for use with reactive chemicals: Glass bodies are inert to many chemical reactions
    • Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
    • Ready for wet or corrosive environments: BNC boot protects meter connection
    Recommended for: Low ionic samples, medical and pharmaceutical research, biological samples (including TRIS buffer), samples containing heavy metals
    Quick View

    pH2400 Extended Life Glass pH Electrode

    Product Description
    Environmental, wastewater, and other sampling applications may expose electrodes to unknown contaminants. Over time, exposure to contaminants such as heavy metals and reactive chemicals, will take a toll on a sensor’s functional components. The best sensors for these types of applications are built to safely handle contaminants to maximize working lifetime. Our pH2400 is a glass electrode with double junction reference design to prevent fouling by sample contaminants that interact with Silver (Ag). The refillable reference junction allows users to replace the liquid fill solution as it becomes depleted or contaminated, instead of replacing the whole sensor.
    • Accurate measurements across full pH scale (0-14)
    • Maximum chemical compatibility: glass electrode bodies are inert to most reactions
    • Extended lifetime: Refillable reference junction allows sensor maintenance, saving replacement costs
    • Great for wet or corrosive environments: BNC boot protects meter connection
    • Compatible with any meter accepting BNC
    • Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
    • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
    Quick View

    pH1000 Polycarbonate Laboratory Plastic pH Sensor

    Product Description
    Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. This low maintenance, low cost pH sensor provides reliable readings in a range of environments, from greenhouses to science classrooms. This sensor stands up to the usual wear and tear with its durable polycarbonate body and built-in protection for the pH glass measuring surface. Compatible with all pH meters accepting a BNC connector.
    • Very fast response time: Platinum measurement surface for fast response time and stable readings
    • No maintenance required: Sealed, no maintenance reference design
    • Durable construction: Polycarbonate body is built for frequent lab or field use
    • Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
    • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
    Back to top