pH3000 Research-Grade Plastic pH Sensor (Refillable)

Product Description

Looking to measure the pH of soil, meat, or cheese? A standard pH sensor with bulb shaped glass won’t effectively pierce the surface of these semi-solids; the pH glass may even crack. That’s why we’ve created the pH2200 spear tip pH sensor, specially designed to penetrate semi-solid surfaces for effective pH measurement. The sensor is assembled with a bio-friendly Ultem® body, making it safe for use in food and soil. Use this durable pH sensor at home or in the field with any pH meter accepting a BNC connector.

• Rugged spear tip measurement surface for piercing semi-solid samples
• Bio-friendly Ultem® body for safe measurements in food and soil
• Long-lasting with built-in protection against protein contamination
• No refilling or maintenance required with sealed gel-filled design
• Instantly ready for use and shipped in storage bottle for long shelf life

Key Benefits

Pi’s FluoriSense range of fluoride monitors and fluoride analyzers utilize the very latest and best fluoride sensors available in the world today for measuring the online fluoride content of any potable water. They are ion selective electrodes (ISEs) with integral reference, automatic temperature compensation and solid polymeric junction. which use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs.

• Measuring method: ISE (Ion Specific Electrode)
• Measure range: 0.02 ppm saturation
• Sample pH range: 5 to 7 pH at 1 x 10⁻⁶ M / 5 to 11 pH at saturation
• Temperature range: 0 to 80°C continuous / 80 to 100°C intermittent
• Electrode resistance: less than 50 MΩ
• Reproducibility: ±2%
• Cable length: 100cm
• Calibration: Manual using test kit
• No reagent required

Product Description

The FT500-Series is a batching flow processor with additional output controls. It is designed for use with Seametrics flow meters and flow sensors, as well as other manufacturer’s products which have frequency output proportional to flow. In addition to batch functions, the FT500- Series indicates flow rate, and other data in large 3/8” (9.66 mm) digits on an easily-read, backlit display. Units of measure are user selectable, and range from milliliters per second to millions of gallons per day. The unit can be 110 Vac powered with a standard 3-wire cord (included), 220 Vac powered (optional), or DC powered through an internal terminal strip. An analog output of 4-20 mA is available both in active and passive loop configuration, and in 0-5 Vdc or 0-10 Vdc outputs, and can be used in applications such as flow rate logging. Two programmable pulse scaled outputs are also standard, and can be used, for example, to provide proportional chemical feed with a pulse-responsive metering pump. The housing is supplied with two brackets for wall-mount applications, or the top/bottom housings can be easily separated and reassembled for panel-mount.

• Large backlit alphanumeric display
• Built-in 4-20 mA analog output
• User-scaled pulse output for chemical metering pumps or telemetry
• Two relay outputs for staged shutoff (batching) or dual setpoints (alarm option)
• Rugged cast aluminum housing
• Wall or panel mounting

Compact and Pragmatic

The PC-110 pH/ORP monitors utilize microprocessor technology to provide you enhanced capabilities with economical price. The compact design fits in small space installaion. The PC-100 features for sample monitoring and the PC-110 offers one relay output to sufficiently activate your process system.

Applications

Water treatment Pure water System Clean room Wastewater treatment Scrubber Electronics process

Features

1. 48 x 96 mm Microprocessor pH/ORP Monitor & Controller
2. Sensor slope performance diagnosis & error message
3. User-friendly operation
4. Automatic temperature compensation
5. Compatible with Pt-1000 and NTC 30K temperature probe
6. Isolated current output DC 0/4~20mA
7. Gradually continuous sample measurements average function to enhance stability
8. PC-110 offers one relay contact output, one set point with programmable hysteresis function

Key Benefits

• From 2 NTU to 8% Solids
• Displays in NTU, mg/l, g/l or % solids – flexible
• Auto-clean optical sensor – months without maintenance
• Stable and reliable – excellent process control
• Suitable for all potable, waste and process waters
• Up to 12 months between maintenance
• Up to 12 months between calibration

The SoliSense® suspended solids sensor is available with different controllers giving you the same great performance with different communication, display, and control options. With the SoliSense® range of online suspended solids analyzers, you get everything that you need – and nothing that you don’t, without sacrificing the quality of measurement. The use of a single sensor to robustly and accurately measure a large dynamic range of suspended solids allows for:

• Less spares – more commonality across a single or multiple sites
• No requirement to know the range prior to specifying – easier purchasing
• One online suspended solids analyzer can be:
  • Online mlss meter
  • Online tss meter
  • Online total suspended solids meter
  • Online effluent monitor
  • Online inlet monitor
  • Online ‘in process’ suspended solids analyzer