PC-110 pH/ORP Panel Meter
Product Information
Category: Water Quality Monitoring SystemsCompact and Pragmatic
The PC-110 pH/ORP monitors utilize microprocessor technology to provide you enhanced capabilities with economical price. The compact design fits in small space installaion. The PC-100 features for sample monitoring and the PC-110 offers one relay output to sufficiently activate your process system.
Applications
Water treatment
Pure water System
Clean room
Wastewater treatment
Scrubber
Electronics process
Features
- 48 x 96 mm Microprocessor pH/ORP Monitor & Controller
- Sensor slope performance diagnosis & error message
- User-friendly operation
- Automatic temperature compensation
- Compatible with Pt-1000 and NTC 30K temperature probe
- Isolated current output DC 0/4~20mA
- Gradually continuous sample measurements average function to enhance stability
- PC-110 offers one relay contact output, one set point with programmable hysteresis function
Related Products
TurbSense®
Key Benefits
The TurbSense® online turbidity meters are available with different controllers giving you the same great performance with different communication, display, and control options. With the TurbSense® range of online turbidity meters, you get everything that you need – and nothing that you don’t, without sacrificing the quality of the measurement. The online turbidity meters from Pi are now in use around the world providing trouble free, easy to use solutions to a range of online turbidity monitoring and control.- Autoclean solid state optical sensor – no moving parts
- Single point calibration – very easy to use
- Stable and reliable – excellent process control
- Suitable for all potable, waste and process waters between 0 NTU and 1000 NTU
- ‘Maintenance free’ – low cost of ownership
- No ‘zero’ required – improved accuracy at the low end
- Up to 1 year between calibration – very little drift
- Up to 10 bar – for inline operation
- 0.001 resolution
- Automatic debubbling and bubble removal solutions – no interference from bubbles
was last modified: April 16th, 2019
pH2100 Flat Tip Plastic pH Electrode
Product Description
Agar plates, skin, and electrophoresis gels are all surfaces that may be difficult to measure with a typical pH glass bulb due to concerns about breakage. To facilitate these and other surface measurements, we created the pH2100 flat tip pH electrode. It has a rugged flat measurement surface, which breaks less easily when it comes in contact with hard materials. This makes it a great choice for measuring slurries, sludges, and viscous samples as well as those containing suspended solids.- Ideal for surface measurements and slurries: rugged flat measurement tip resists breakage
- Great for testing unknown sample types: double junction electrode reference design prevents contamination
- Durable and Versatile: Ultem® body offers enhanced chemical compatibility and booted BNC protects meter connection
- No maintenance required: sealed gel filled reference design
- One year limited warranty: We stand by our products with the Sensorex guarantee
was last modified: April 25th, 2019
ORP2000 Extended Life ORP Sensor
Product Description
When measuring samples such as wastewaster that may contain proteins, heavy metals, or other contaminants, it is important to use an ORP sensor (REDOX sensor) designed to withstand unpredictable chemical environments. The ORP2000 features double junction reference protection, which prevents contamination by sample components that interact with silver (Ag). The durable Ultem® body ensures extensive chemical compatibility, making the ORP2000 a highly versatile analytical tool.- Virtually unbreakable with durable Ultem® body construction and recessed protected glass
- Reliable and accurate ORP / REDOX measurements
- No refilling or maintenance required with sealed gel-filled design
- Instantly ready for use and shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty
was last modified: April 25th, 2019
pH2400 Extended Life Glass pH Electrode
Product Description
Environmental, wastewater, and other sampling applications may expose electrodes to unknown contaminants. Over time, exposure to contaminants such as heavy metals and reactive chemicals, will take a toll on a sensor’s functional components. The best sensors for these types of applications are built to safely handle contaminants to maximize working lifetime. Our pH2400 is a glass electrode with double junction reference design to prevent fouling by sample contaminants that interact with Silver (Ag). The refillable reference junction allows users to replace the liquid fill solution as it becomes depleted or contaminated, instead of replacing the whole sensor.- Accurate measurements across full pH scale (0-14)
- Maximum chemical compatibility: glass electrode bodies are inert to most reactions
- Extended lifetime: Refillable reference junction allows sensor maintenance, saving replacement costs
- Great for wet or corrosive environments: BNC boot protects meter connection
- Compatible with any meter accepting BNC
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
was last modified: April 25th, 2019
SG-2110-RS Intelligent Specific Gravity Transmitter
Applications
Electronics industry Chemical industryFeatures
- Waterproof and dustproof design
- 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
- Measuring unit: SG/°Bé/ ppt/ %
- User-friendly operation with text and graphic illustration, clear signs and easy to understand
- Measuring value can be selected for figure or chart display
- Trace mode can display historical measured value curve from 3-minute to 4-week program
- Equipped with logbook function
- Large LCM display with auto-sense backlight and contrast setting function
- Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
- Cell constant, Pure water, Known solution— 3 types calibration
- Simultaneous display of measurement value and temperature
- Automatic temperature compensation for setting
- Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
- Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
- With password and multi-key design, enhanced security protection
- LED indicated alarm
- IP 65 (NEMA 4X)
Specific Gravity Sensor
Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas design was last modified: March 23rd, 2019
FT520 Batch Flow Processor
Product Description
The FT500-Series is a batching flow processor with additional output controls. It is designed for use with Seametrics flow meters and flow sensors, as well as other manufacturer’s products which have frequency output proportional to flow. In addition to batch functions, the FT500- Series indicates flow rate, and other data in large 3/8” (9.66 mm) digits on an easily-read, backlit display. Units of measure are user selectable, and range from milliliters per second to millions of gallons per day. The unit can be 110 Vac powered with a standard 3-wire cord (included), 220 Vac powered (optional), or DC powered through an internal terminal strip. An analog output of 4-20 mA is available both in active and passive loop configuration, and in 0-5 Vdc or 0-10 Vdc outputs, and can be used in applications such as flow rate logging. Two programmable pulse scaled outputs are also standard, and can be used, for example, to provide proportional chemical feed with a pulse-responsive metering pump. The housing is supplied with two brackets for wall-mount applications, or the top/bottom housings can be easily separated and reassembled for panel-mount.- Large backlit alphanumeric display
- Built-in 4-20 mA analog output
- User-scaled pulse output for chemical metering pumps or telemetry
- Two relay outputs for staged shutoff (batching) or dual setpoints (alarm option)
- Rugged cast aluminum housing
- Wall or panel mounting
was last modified: April 25th, 2019
StreamerSense
Key Benefits
- Immediate response to process changes in coagulation treatment – coagulation monitor
- Maintain high quality finished water through improved coagulation control –coagulation controller
- Reduce coagulant/polymer costs – coagulant analyzer
- Automate dosing coagulant/polymer dosing using the streaming current monitor –coagulant control
- Ensure coagulation reliability – coagulant analyzer
- Improve operator efficiency – coagulant analyzer
- Improve filter performance and coagulation treatment – coagulation controller
- Monitor your coagulation control process – coagulation monitor
Streaming Current Monitors Standard Features
- Patented sensor design
- Quick replacement probe and piston
- Self-diagnostic sensor
- High-volume flow minimizes sensor fouling
- Removes electronics from harsh environments
- Corrosion-free Nema 4x enclosure (IP65)
- Optional computer interface
- Spare probe cartridge and piston included
- Auxiliary input signals
was last modified: April 16th, 2019
OzoSense
The OzoSense Online Dissolved Ozone Monitor from Pi for the measurement of the ozone concentration in water, is designed to be simple to install and operate, and offers unrivalled stability, accuracy and precision, whilst offering excellent value for money.
The OzoSense range of online dissolved ozone analyzers and dissolved ozone monitors utilize the very latest and best ozone sensors available in the world today. There are two sensors in the OzoSense range. The first is a membraned device which is insensitive to changing pH, uses no reagents, is extremely stable, and has reduced maintenance and reduced whole life costs. The second is a non membraned three electrode sensor, that can operate at higher temperatures and pressures.
Key Benefits
- Stable and reliable – excellent ozone process control – ozone controllers
- Suitable for all potable, process and salt waters – ozone monitor – ozone analyzer
- Up to 6 months between maintenance
- Up to 3 months between calibration
- Does not respond to residual chlorine (OzoSense M)
- Resistant to detergents in the water
- Up to 70°C (OzoSense NM)
- Onboard PID controls – dissolved ozone Controller
- Onboard data logging and graphing capability
- Onboard comms such as TCP/IP, Modbus, Profibus and more.
was last modified: April 16th, 2019
PC-3100 Series Microprocessor pH/ORP Transmitter
Robust protection and precise integration
The PC-3100 series pH/ORP transmitter has rugged IP 65 enclosure and can be wall, panel, pipe mounted for installation in almost any industrial application. The PC-3100RS offers RS-485 interface to support digital communication to your PLC. The transmitters inherit our reliable technology which features in accurate, robust, and easy to use functions.
Applications
Water treatment Chemical process Biochemical process Wastewater treatment Electrical process Food and beverage processFeatures
- pH, ORP, Temperature measurement
- IP 65 waterproof and dustproof design
- Back-lit LCD with ON/OFF/Auto programmable illumination
- Two sets of isolated current output DC 0/4~20mA corresponding to measurement and temperature
- Two Hi/Lo Limited contact outputs; Set points with programmable hysteresis function
- Automatic temperature compensation
- Gradually continuous sample measurements average function to enhance stability
- Wash function with programmable time-interval control
- LED indication alarm or wash status signal
- Password protection
- PC-3100RS with one analog output and one RS-485 interface
was last modified: March 23rd, 2019
UV254Sense
Key Benefits
Standard Features
was last modified: April 16th, 2019