The highly efficient SMS Static Mixing Spool creates a homogenous flow within your pipeline, ensuring accurate sampling and water cut measurement. Not only does the Static Mixing Spool require no outside energy source, but through its unique design it achieves turbulent flow at a much lower Reynolds number than other conventional static mixers.
The spool is composed of a fixed arrangement of positive and negative members which simultaneously create cross-current mixing for increased turbulence and mixing. Because the SMS spool is so efficient, you can create a homogenous mixture with a very short spool. Often as few as two members.
- Low pressure drop
- Simple and rugged
- No moving parts
- Uniform density
- Uniform temperature
- Minimal operating cost
Product DescriptionCustomized to fit each application, the Complete Sampling System includes one of our patented mixing elements to ensure homogeneity, a flow meter, an IAS Isokinetic Automatic Sampler, a Sampler Controller, a Sample Receiver, a Meterizer or Weight Scale, and a Circulating Sample Mixer. The system is fully compliant with API MPMS Chapter 8.2/ASTM D4177 and ISO 3171. Based on a downhole pump design, the IAS Isokinetic Automatic Sampler features the simplest design in the industry and is the ideal instrument for pipeline sampling during custody transfer, marine unloading, lightering, etc. The IAS sampler’s high degree of accuracy and simplicity facilitate extracting a representative sample, regardless of viscosity, pressure, or flow rate. Working with the SC Sampler Controller, the IAS sampler easily extracts a representative sample from your pipeline into an SR Sample Receiver. With a CSM Circulating Sample Mixer, you may then mix and analyze the sample for custody transfer, API gravity measurements, shrinkage, chemical composition, etc.
- Patented microwave resonance technology
- AnyDensity™ density compensation for full API gravity range
- Highest accuracy available (0.03%)
- Automatic temperature correction
- Spool and insertable models available for maximum installation flexibility
- Real-time continuous water percentage
- Local display
- Up to ANSI 900
- Easily field calibrated
With 1% of full scale accuracy regardless of range, the rugged OWD Water Cut Meter is the ideal instrument for monitoring water concentrations in a variety of applications from production to refinery. The OWD offers continuous, real-time, water cut data.
Unlike other water-cut meters, the OWD’s patented multi-antenna design reads both oil continuous and water continuous modes simultaneously and automatically transitions between the two. The result is measurement over a true 0-100% range. Water-cut measurement is fully automatic with no need for operator intervention or supervision.
The OWD also uses internal references to auto calibrate for drift caused by temperature changes of the electronics, the aging of the electronics components, fluid pressure, and fluid temperature.
The simplicity of design and quality of engineering employed in the OWD Water Cut Meter mean there are no moving parts. The output signal can be sent to Flow Computers, SCADA, PLC’s or to a Central Control Room for logging or display on chart recorders or monitors.
- Full 0-100% range
- Automatic temperature correction
- 1% of full scale accuracy
- All requisite electronics housed within unit (can also be mounted remotely) and included in unit price
- No salinity offset required
The KAM® OID™ Optical Interface Detector has been the preferred sensor for interface detection between refined products since its inception in 2000. Like eyes in the pipe, it provides accurate, real-time data on product interface even when density does not change between products, allowing operators to make cuts with confidence and significantly reduce product downgrade and/or transmix.
Fiber optics within the patented optical probe respond to the absorption, fluorescence, and refractive properties of the fluid, and the combined return signal is then turned into an “optical signature,” recognizing qualitative changes in pipeline fluids.
The OID is designed for minimal maintenance and ongoing ease of use. Long-lasting LED light sources ensure long-term, stable performance and minimal power consumption. All electronics are located in an explosion-proof enclosure directly on the end of the probe for a complete and compact unit with maximum installation flexibility.
Measurement is completely automatic and the output signal can be sent to the SCADA, PLC’s, or to a Central Control Room.
- Detects the interface of specialty fuels such as ULSD (Ultra-Low Sulfur Diesel)
- Electronics are housed directly on the atmospheric end of the probe
- No moving parts
- Insertable model installs without having to drain the pipe
- Uses LED's for long-term performance with minimal power and maintenance requirements
- Lenses do not require cleaning
Tank dewatering is vital for maximizing crude oil storage and minimizing tank corrosion, but manual operations can be costly in terms of inaccuracy, manpower and environmental liabilities. The ATD Automated Tank Dewatering system ensures maximum storage efficiency without the danger of hydrocarbons contaminating the draw-off line.
Sold as a complete system or as individual units that users can connect to an existing PLC, the ATD uses two microwave probes to monitor water levels in the tank. Communicating with a PLC, the system controls an MOV (motor operated valve) on the draw off line–opening when water levels rise, and closing when the emulsion layer has descended to the bottom of the tank.
The KAM ATD probe is also unique in its solid body design, preventing the accumulation of paraffin or other contaminants on the probe which prevent the probe from accurately registering rising water levels.
- Solid antenna design prevents tank debris from clogging probe
- Inserts directly into the tank without the need to drain the tank
- All requisite electronics for probes housed within unit and included in unit price
Ideal for turbidity or haze detection at pipeline terminals, refineries, airports, and more, the KAM THA Turbidity Haze Analyzer alerts operators to the presence of water or particulate contamination in all refined fuels and helps them to determine the source of contamination. The THA is based on the KAM CHA’s proven turbidity detection technology, already in operation throughout the United States, Asia and Europe.
Real-time turbidity / haze data can be used for ongoing quality control in all refined fuels including diesel, jet fuel, and gasoline. This data provides pipeline operators with the intelligence required to monitor fuels at both receiving and delivery terminals reject non-comforming batches and assists multiple parties in determining the location and/or responsibility of water contamination. In addition, the THA provides refineries quality control data prior to distribution and allows refiners to monitor and optimize the performance of filters, coalescers and separators.
Like all KAM instruments, the THA is easily installed either by inserting directly into the pipe, or in an analyzer loop. It can be installed without having to ever drain the pipe and output is a basic 4-20 mA. With no moving parts and long-lasting LED’s, the THA is designed for minimal power usage, minimal maintenance and long life.
- Proven technology
- Does not require calibration
- Inserts into the pipeline without having to drain the pipe
- No moving parts
- Long-lasting LED with minimal power consumption
In refined petroleum products, color variations indicate impurities and/or the presence of trace water or haze. This contamination can be a significant liability as color differentiation can be easily detected by the end user. The CHA Colorimeter/Haze Analyzer is the ideal qualitative solution for monitoring both the color of refined products, including those with added dyes, and the presence of haze or turbidity in pipelines following the refining process. In addition, it can be used as quality control with water treatment.
Utilizing a unique 5-LED design, the CHA detects color variations within 1%, and unlike most colorimeters, it can detect the entire range of visible color as defined by CIE 1931 (International Commission on Illumination). Final color measurement can be expressed as haze plus three color (X, Y, Z) or one of several industry-standard color scales including, Saybolt, Platinum and Cobalt, and ASTM.
Turbidity or haze measurement allows refineries and pipeline operators to identify and redirect non-conforming batches.
Measurement is fully automatic, and the CHA Colorimeter/Haze Analyzer does not require site calibration. It employs long lasting LED light sources ensuring long-term, stable performance with limited maintenance and power requirements. In addition, locating the electronics within an explosion-proof enclosure directly on the atmospheric end of the optical probe creates a complete and compact unit with maximum installation flexibility. The CHA easily installs where other colorimeters, weighed down by large electronics/computer units, cannot.
A paper on Interface Detection in Liquid Pipelines, including the CHA, was presented at the International School of Hydrocarbon Management in Oklahoma City, Oklahoma.
- Only Colorimeter unit on the market with incorporated electronics
- Accuracy to ± 1%
- No moving parts
- 5-LED Design offers greater accuracy over other, 3-LED models
- Measures full spectrum of visible color (CIE 1931)
Easy to use and fully automatic, KAM KF Karl Fischer Moisture Analyzers make the determination of oil/water content in crude oils extremely simple, fast and accurate. Whether you are using it in the lab or the field, the KAM KF is specially designed for oil-industry applications with a rugged exterior, extra storage and convenience all in mind.
In most cases, KAM moisture analyzers process samples in less than five minutes, accurately determining the water content in crude oil samples for all custody transfer operations: production, pipeline, marine, or truck. They can also be used to analyze refined products, transformer oils, jet fuels, chemicals, and most other liquids.
- Fully automatic operation
- Automatic reagent expiration notification
- Graphic LCD digital display
- Bluetooth connection
- Windows based software
- USB port
- Bluetooth connection
- Battery life indicator
- Printer (Optional)
- Portable unit
- Storage for all consumables
A superior option to traditional BS&W technologies, the patented offers the high accuracy and repeatability of microwave measurement in a package specifically designed for custody transfer and other low range applications.
Unique to the LRW™, AnyDensity™ technology allows the instrument to compensate for any change in density across the entire API gravity range.* This is paramount in situations where a single truck or rail unloading site could see swings in API gravity from the 20’s to the 60’s.
The patented and proven microwave technology used in the LRW™ provides industry-leading accuracy – as low as ±0.03% on 0-3% models. And, high quality components made and assembled entirely in the USA provide reliable and consistent performance for long-term use. Plus, the unit can easily be calibrated in line.
With insertable and spool/flow through models, the LRW™ also offers installation flexibility that no other unit can match. Spools can be custom fabricated for lines 1-2” and lengths 21” and above. Spools also incorporate static mixing elements to ensure a homogeneous flow and manual draw-off valves key for calibration and verification. Fixed insertion and insertable models can be installed on a 2″ port perpendicular to the flow.
- Meets API 8.2, ASTM D4177 and ISO 3171
- Simplest design in the industry
- Fully insertable
- No system shut downs
- 0.5 – 3 ml sample per bite
- Pneumatic or hydraulic drive
- Very low maintenance