Multifunction Meter CX-701
Product Information
Category: Water Quality Monitoring SystemsKey Benefits
- All operations are done with use of buttons generated on the 10‘‘ colour graphic backlit touch screen.
- CX-701 may be used in laboratory as well as in the field after placing it in a special case with rechargeable
batteries (optional). - The rechargeable batteries allow for continuous work in the field for 8 – 15 hours, depending on the kind of
chosen measuring functions and settings of the screen etc. - Possibility of simultaneous measurements and observing results of up to 5 functions displayed in numerical
form, function chosen as the main one may also be displayed in graphical form. - The pH, ions, mV and temperature inputs are isolated from the dissolved oxygen and conductivity inputs.
- Additional information is given as pop up windows and voice messages.
- Storing the date of next calibration.
Other Features
- The results are stored on the 2GB SD memory card, the number of collected data is practically unlimited.
- Two ways of co-operation with a PC: by connecting the SD card with a PC and transferring the data included on the card, by connecting the meter with a PC with use of USB cable, what enables transfer of the current readouts or the series collected in the meter’s memory to the PC.
- The results of all actually measured functions are stored simultaneously.
- Storing of measurement’s results with time and date, taken as single or in series with set time interval.
- Automatic or manual temperature compensation.
- The charts are scaled both during the continuous observation and during the analysis of the collected results,
zoom function. - The results and calibration data are stored in non-volatile memory.
- Internal clock with date.
- Powered with 15V power adapter.
- The meter meets the GLP requirements.
- 24 months of warranty.
- CX-701 was awarded with 2 golden medals on EUROLAB 2009 international fairs.
Related Products
SG-2110-RS Intelligent Specific Gravity Transmitter
Applications
Electronics industry Chemical industryFeatures
- Waterproof and dustproof design
- 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
- Measuring unit: SG/°Bé/ ppt/ %
- User-friendly operation with text and graphic illustration, clear signs and easy to understand
- Measuring value can be selected for figure or chart display
- Trace mode can display historical measured value curve from 3-minute to 4-week program
- Equipped with logbook function
- Large LCM display with auto-sense backlight and contrast setting function
- Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
- Cell constant, Pure water, Known solution— 3 types calibration
- Simultaneous display of measurement value and temperature
- Automatic temperature compensation for setting
- Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
- Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
- With password and multi-key design, enhanced security protection
- LED indicated alarm
- IP 65 (NEMA 4X)
Specific Gravity Sensor
Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas design was last modified: March 23rd, 2019
pH1400 Light Duty Glass pH Electrode
Product Description
Whether you are a student measuring pH in a lab or a business owner monitoring plant or crop health, you need a pH probe that will consistently deliver accurate measurements. If you deal with a wide variety of chemicals or any aggressive substances, a glass pH probe like our pH1400 is a safe choice due to the chemically inert properties of glass. This basic, single junction electrode has a refillable reference cell, allowing users to maintain measurement precision throughout instrument lifetime.- Accurate measurements across full pH scale (0-14)
- Easily maximize measurement repeatability: refillable reference cell with liquid solution
- Maximum chemical compatibility: glass probe body is inert to most reactions
- Compatible with a variety of pH meters: use this probe with any pH meter accepting BNC
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
was last modified: April 25th, 2019
StreamerSense
Key Benefits
- Immediate response to process changes in coagulation treatment – coagulation monitor
- Maintain high quality finished water through improved coagulation control –coagulation controller
- Reduce coagulant/polymer costs – coagulant analyzer
- Automate dosing coagulant/polymer dosing using the streaming current monitor –coagulant control
- Ensure coagulation reliability – coagulant analyzer
- Improve operator efficiency – coagulant analyzer
- Improve filter performance and coagulation treatment – coagulation controller
- Monitor your coagulation control process – coagulation monitor
Streaming Current Monitors Standard Features
- Patented sensor design
- Quick replacement probe and piston
- Self-diagnostic sensor
- High-volume flow minimizes sensor fouling
- Removes electronics from harsh environments
- Corrosion-free Nema 4x enclosure (IP65)
- Optional computer interface
- Spare probe cartridge and piston included
- Auxiliary input signals
was last modified: April 16th, 2019
pH3400 Research Grade Glass pH Electrode
Product Description
In laboratory environments such as medical, biological, and materials science research groups, samples and test conditions are constantly changing, but accuracy is always critical. The pH3400 is a highly versatile glass combination pH electrode, specially designed to respond quickly and accurately to rapid temperature changes. The high sensitivity internals allow testing of low ionic samples. Safely measure samples containing heavy metals, TRIS buffer, or proteins thanks to the double junction reference design, which prevents fouling. Even test highly reactive chemicals: with a glass body, the pH3400 is inert to a wide range of chemical reactions.- Our most sensitive laboratory electrode: accurate to 0.04 pH in tests across full recommended temperature range
- Easily maximize measurement repeatability: Rapid renew reference system for quick refilling
- Safe for use with reactive chemicals: Glass bodies are inert to many chemical reactions
- Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
- Ready for wet or corrosive environments: BNC boot protects meter connection
was last modified: April 25th, 2019
AquaSense
Swimming pools and spas use chlorine as a disinfectant and so use an analyzer to control the amount of chlorine that gets dosed. The AquaSense Swimming Pool Controller and Spa Controller measures the pool chlorine levels and the pH of the pool and then controls the chlorine and pH levels by controlling the chemical dosing. The AquaSense offers bufferless and reagentless operation and is suitable for commercial, municipal and community swimming pools.
The AquaSense has been designed to three criteria:
- Improved Safety – better sensors lead to better process control which leads to less variation in chlorine residuals even with highly variable bathing load.
- Improved Control – better process control leads to reduced chemical usage, lower costs and an improved bathing experience.
- Reduced Costs – lower chemical costs, less expensive controllers, inverter control leading to hugely reduced electrical usage costs are just a few of the ways that the AquaSense can save you money which can pay for a new controller in just a few months.
Key Benefits
- Inverter control for massive electricity and CO2 savings
- Stable and reliable residual chlorine and pH measurement and control
- Low purchase cost
- Low cost of ownership
- SMS text alarms
- Remote access via Internet
- Suitable for fresh water, salt water and outdoor pools with cyanuric acid
- Private label option for re-sellers
- Other inputs to data log and alarms
was last modified: April 16th, 2019
pH2200 Spear Tip Plastic pH Sensor
Product Description
Looking to measure the pH of soil, meat, or cheese? A standard pH sensor with bulb shaped glass won’t effectively pierce the surface of these semi-solids; the pH glass may even crack. That’s why we’ve created the pH2200 spear tip pH sensor, specially designed to penetrate semi-solid surfaces for effective pH measurement. The sensor is assembled with a bio-friendly Ultem® body, making it safe for use in food and soil. Use this durable pH sensor at home or in the field with any pH meter accepting a BNC connector.- Rugged spear tip measurement surface for piercing semi-solid samples
- Bio-friendly Ultem® body for safe measurements in food and soil
- Long-lasting with built-in protection against protein contamination
- No refilling or maintenance required with sealed gel-filled design
- Instantly ready for use and shipped in storage bottle for long shelf life
was last modified: April 25th, 2019
pH1000 Polycarbonate Laboratory Plastic pH Sensor
Product Description
Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. This low maintenance, low cost pH sensor provides reliable readings in a range of environments, from greenhouses to science classrooms. This sensor stands up to the usual wear and tear with its durable polycarbonate body and built-in protection for the pH glass measuring surface. Compatible with all pH meters accepting a BNC connector.- Very fast response time: Platinum measurement surface for fast response time and stable readings
- No maintenance required: Sealed, no maintenance reference design
- Durable construction: Polycarbonate body is built for frequent lab or field use
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
was last modified: April 25th, 2019
S272CD Online Process pH Sensor
Product Description
The S272CD online process pH sensor delivers reliable online monitoring for in-line or submersion installation configuration. This sensor is designed to extend sensor lifetime with double-junction technology. Minimal maintenance required due to flat glass measurement surface. A versatile sensor for moderate and multi-purpose applications.- Reliable performance in demanding applications: Liquid flow naturally cleans the flat pH measurement surface
- Extended sensor lifetime: Double junction technology extends sensor lifetime by preventing reference contamination
- Versatile design for many applications: 3/4″ NPT threads on both ends for submersion or in-line mounting
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
was last modified: April 25th, 2019
pH2000 Extended Life Laboratory Plastic pH Sensor
Product Description
Applications such as environmental and wastewater sampling involve some uncertainty about what samples may contain. When dealing with unknown or unpredictable sample types, you need a durable pH probe you can trust to deliver accurate measurements regardless of the contaminants you encounter. The pH2000 has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants. When you travel to remote sites to collect data, it is especially important that obtaining the measurements you need is hassle free. The pH2000 features an Ultem® body and a booted meter connection for durability in the field. The sealed reference design requires no maintenance. Compatible with any meter accepting a BNC connector.- Durable and low maintenance: Ultem® body construction, reinforced meter connection, and sealed reference design
- Great for testing unknown sample types: Double junction reference protection prevents reference cell contamination
- Accurate measurements across full pH scale (0-14)
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- Compatible with any meter accepting a BNC connector
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
was last modified: April 25th, 2019
pH2500 Flat Surface Glass pH Electrode
Product Description
Surfaces like paper, leather, electrophoresis gels and agar plates may be difficult to measure with traditional pH glass bulbs due to concerns about breakage. A flat electrode like our pH2500, is ideally suited for these types of pH measurements as well as measurements of suspended sludges and slurries. In addition to its specially designed measurement surface, the pH2500 features double junction construction, which prevents contamination and allows testing of samples containing heavy metals or proteins.- Perfect for gels and slurries: Flat electrode measurement surface designed for testing special sample types
- Accurate measurements across full pH scale (0-14)
- Highly adaptable: Compatible with any pH meter accepting BNC
- Low maintenance: Gel-filled electrode reference design with double junction to prevent contamination
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
was last modified: April 25th, 2019