Product Information
Category: Water Quality Monitoring SystemsProduct Description
The iMAG-Series is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 3” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.
iMAG-Series meters are CE certified, certified to NSF/ANSI standard 61 and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously.
The display can be meter mounted or remote, and both rate and total indication are standard. Rate and total units and pulse scaling can be set via the front panel touch key pad by the user. Bidirectional flow reading is standard with totals available in forward, reverse, net flow, batch forward flow, and batch reverse flow. Batch totals can be reset.
A power/output cable allows outputs for use with a variety of Seametrics and other displays and controls for remote reading and telemetry applications. Pulse output is standard on all models and 4-20mA passive current loop is standard on the iMAG 4700p. In addition, 4-20mA loop, HART protocol, high speed digital, and Modbus® protocol outputs are optional on the externally powered units, depending on model.
Related Products
S272CD Online Process pH Sensor
Product Description
The S272CD online process pH sensor delivers reliable online monitoring for in-line or submersion installation configuration. This sensor is designed to extend sensor lifetime with double-junction technology. Minimal maintenance required due to flat glass measurement surface. A versatile sensor for moderate and multi-purpose applications.- Reliable performance in demanding applications: Liquid flow naturally cleans the flat pH measurement surface
- Extended sensor lifetime: Double junction technology extends sensor lifetime by preventing reference contamination
- Versatile design for many applications: 3/4″ NPT threads on both ends for submersion or in-line mounting
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
FluoriSense
Key Benefits
Pi’s FluoriSense range of fluoride monitors and fluoride analyzers utilize the very latest and best fluoride sensors available in the world today for measuring the online fluoride content of any potable water. They are ion selective electrodes (ISEs) with integral reference, automatic temperature compensation and solid polymeric junction. which use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs.- Measuring method: ISE (Ion Specific Electrode)
- Measure range: 0.02 ppm saturation
- Sample pH range: 5 to 7 pH at 1 x 10⁻⁶ M / 5 to 11 pH at saturation
- Temperature range: 0 to 80°C continuous / 80 to 100°C intermittent
- Electrode resistance: less than 50 MΩ
- Reproducibility: ±2%
- Cable length: 100cm
- Calibration: Manual using test kit
- No reagent required
PC-3100 Series Microprocessor pH/ORP Transmitter
Robust protection and precise integration
The PC-3100 series pH/ORP transmitter has rugged IP 65 enclosure and can be wall, panel, pipe mounted for installation in almost any industrial application. The PC-3100RS offers RS-485 interface to support digital communication to your PLC. The transmitters inherit our reliable technology which features in accurate, robust, and easy to use functions.
Applications
Water treatment Chemical process Biochemical process Wastewater treatment Electrical process Food and beverage processFeatures
- pH, ORP, Temperature measurement
- IP 65 waterproof and dustproof design
- Back-lit LCD with ON/OFF/Auto programmable illumination
- Two sets of isolated current output DC 0/4~20mA corresponding to measurement and temperature
- Two Hi/Lo Limited contact outputs; Set points with programmable hysteresis function
- Automatic temperature compensation
- Gradually continuous sample measurements average function to enhance stability
- Wash function with programmable time-interval control
- LED indication alarm or wash status signal
- Password protection
- PC-3100RS with one analog output and one RS-485 interface
pH2000 Extended Life Laboratory Plastic pH Sensor
Product Description
Applications such as environmental and wastewater sampling involve some uncertainty about what samples may contain. When dealing with unknown or unpredictable sample types, you need a durable pH probe you can trust to deliver accurate measurements regardless of the contaminants you encounter. The pH2000 has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants. When you travel to remote sites to collect data, it is especially important that obtaining the measurements you need is hassle free. The pH2000 features an Ultem® body and a booted meter connection for durability in the field. The sealed reference design requires no maintenance. Compatible with any meter accepting a BNC connector.- Durable and low maintenance: Ultem® body construction, reinforced meter connection, and sealed reference design
- Great for testing unknown sample types: Double junction reference protection prevents reference cell contamination
- Accurate measurements across full pH scale (0-14)
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- Compatible with any meter accepting a BNC connector
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
SG-2110-RS Intelligent Specific Gravity Transmitter
Applications
Electronics industry Chemical industryFeatures
- Waterproof and dustproof design
- 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
- Measuring unit: SG/°Bé/ ppt/ %
- User-friendly operation with text and graphic illustration, clear signs and easy to understand
- Measuring value can be selected for figure or chart display
- Trace mode can display historical measured value curve from 3-minute to 4-week program
- Equipped with logbook function
- Large LCM display with auto-sense backlight and contrast setting function
- Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
- Cell constant, Pure water, Known solution— 3 types calibration
- Simultaneous display of measurement value and temperature
- Automatic temperature compensation for setting
- Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
- Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
- With password and multi-key design, enhanced security protection
- LED indicated alarm
- IP 65 (NEMA 4X)
Specific Gravity Sensor
Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas designORP3000 Research Grade ORP Electrode
Product Description
In harsh laboratory or field conditions, where heat, moisture, or corrosive chemicals may damage equipment, ORP electrode durability is key. The ORP3000 is durable, research grade ORP electrode. All the functional components – the ORP measurement surface, the meter connection, and the cable connection – are reinforced with protective elements. Durable Ultem® body construction provides extensive chemical compatibility and withstands temperatures up to 100°C.- Virtually unbreakable: removable guard protects ORP measurement surface and strain relief prevents damage to cable connection
- Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
- No maintenance required: Sealed gel reference design does not require users to refill solution
- Extensive chemical compatibility: Constructed with durable Ultem®, proven in a range of chemical conditions
- Ready for wet or corrosive environments: BNC boot protects meter connection
BioSense
Key Benefits
The BioSense range of qualitative biofouling monitors provide a relative measure of "activity" of biofilm being present in your process, allowing you to dose your biocide accordingly or take other appropriate remidial action.- Legionella control
- Automatic Biocide control
- Can be combined with other sensors
- No maintenance
- Cooling towers and any water circuit
- Seawater option Reduced chemical costs Up to 10 Bar
SoliSense®
Key Benefits
- From 2 NTU to 8% Solids
- Displays in NTU, mg/l, g/l or % solids – flexible
- Auto-clean optical sensor – months without maintenance
- Stable and reliable – excellent process control
- Suitable for all potable, waste and process waters
- Up to 12 months between maintenance
- Up to 12 months between calibration
- Less spares – more commonality across a single or multiple sites
- No requirement to know the range prior to specifying – easier purchasing
- One online suspended solids analyzer can be:
- Online mlss meter
- Online tss meter
- Online total suspended solids meter
- Online effluent monitor
- Online inlet monitor
- Online ‘in process’ suspended solids analyzer
OzoSense
Key Benefits
- Stable and reliable – excellent ozone process control – ozone controllers
- Suitable for all potable, process and salt waters – ozone monitor – ozone analyzer
- Up to 6 months between maintenance
- Up to 3 months between calibration
- Does not respond to residual chlorine (OzoSense M)
- Resistant to detergents in the water
- Up to 70°C (OzoSense NM)
- Onboard PID controls – dissolved ozone Controller
- Onboard data logging and graphing capability
- Onboard comms such as TCP/IP, Modbus, Profibus and more.
TurbSense®
Key Benefits
The TurbSense® online turbidity meters are available with different controllers giving you the same great performance with different communication, display, and control options. With the TurbSense® range of online turbidity meters, you get everything that you need – and nothing that you don’t, without sacrificing the quality of the measurement. The online turbidity meters from Pi are now in use around the world providing trouble free, easy to use solutions to a range of online turbidity monitoring and control.- Autoclean solid state optical sensor – no moving parts
- Single point calibration – very easy to use
- Stable and reliable – excellent process control
- Suitable for all potable, waste and process waters between 0 NTU and 1000 NTU
- ‘Maintenance free’ – low cost of ownership
- No ‘zero’ required – improved accuracy at the low end
- Up to 1 year between calibration – very little drift
- Up to 10 bar – for inline operation
- 0.001 resolution
- Automatic debubbling and bubble removal solutions – no interference from bubbles