Navigation

FT520 Batch Flow Processor

‹Return to Previous Page

Related Products

Quick View

FluoriSense

Key Benefits
Pi’s FluoriSense range of fluoride monitors and fluoride analyzers utilize the very latest and best fluoride sensors available in the world today for measuring the online fluoride content of any potable water. They are ion selective electrodes (ISEs) with integral reference, automatic temperature compensation and solid polymeric junction. which use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs.
  • Measuring method: ISE (Ion Specific Electrode)
  • Measure range: 0.02 ppm saturation
  • Sample pH range: 5 to 7 pH at 1 x 10⁻⁶ M / 5 to 11 pH at saturation
  • Temperature range: 0 to 80°C continuous / 80 to 100°C intermittent
  • Electrode resistance: less than 50 MΩ
  • Reproducibility: ±2%
  • Cable length: 100cm
  • Calibration: Manual using test kit
  • No reagent required
Quick View

DioSense

Key Benefits
The DioSense chlorine dioxide measurement sensors and flow cells are available with different controllers giving you the same great performance with different communication, display, and chlorine dioxide dosing control options. The two controllers offer different options but both offer the same great user interface and Pi’s great quality.
  • Amperometric sensors – continuous online chlorine dioxide ppm measurement
  • No chemical reagents – lower cost of ownership
  • Stable and reliable – excellent process control
  • Suitable for all potable and process waters
  • Up to 6 months between maintenance
  • No interference from residual chlorine (DioSense M)
  • Tolerant of water containing detergents
  • Up to 70°C (DioSense NM)
  • Up to 6 Bar (DioSense NM)
Quick View

UV254Sense

Key Benefits
  • UVA (ultra-violet absorbance) is an excellent surrogate parameter for TOC, DOC, COD and color.
  • UVT (ultra-violet transmission) allows for the calculation of optimal UV dose for disinfection systems, improving efficiency.
  • Accurate detection without the cost of reagents.
  • Few ongoing service or maintenance requirements.
  • Allows feed forward optimization of coagulation control, resulting in decreases in chemical consumption, reduction in sludge removal costs and minimization of DBP formation potential.
  • Strong ROI with pay back on the analyzer being seen by many customers within a few months.
  • UVA measurement ensures performance of various contaminant removal technologies such as membranes (RO, NF, UF), ion exchange (nitrates and TOC removal) and granular activated carbon (GAC).
  • Real time UVA analyzers can provide a final check of effluent water quality and can alarm an operator in case of non-compliance.
  • A UVA monitor can monitor the percentage removal of organics across any treatment system.
  • Can be combined with a CRONOS® or CRIUS® for a multi-parameter UV254 analyzer solution that suits your needs.
  • Standard Features
  • Online continuous operation
  • Patent pending Ortho-Beam technology
  • 254nm wavelength UV light source
  • Displays UV transmittance or absorbance values
  • Quick View

    pH3000 Research-Grade Plastic pH Sensor (Refillable)

    Product Description
    When accuracy and repeatability are critical, such as in pharmaceutical or drinking water applications, the ideal pH electrode will quickly deliver stable measurements. The pH3000 is a research grade pH meter replacement probe specially designed to respond quickly and accurately to rapid temperature changes. The high sensitivity internals also make these electrodes the best choice for low ionic samples. The double junction reference design prevents contamination, allowing pH testing in samples containing heavy metals, proteins and enzymes, or TRIS buffer.
    • Our most sensitive laboratory electrode: accurate to 0.04 pH in tests across full recommended temperature range
    • Easily maximize measurement repeatability: Rapid renew reference system for quick refilling
    • Extensive chemical compatibility: Constructed with durable Ultem®, proven in a range of chemical conditions
    • Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
    • Virtually unbreakable: removable bulb guard protects pH glass and strain relief prevents damage to cable connection
    • Ready for wet or corrosive environments: BNC boot protects meter connection
    • Compatible with various meters: Versatile replacement probe works with any meter accepting a BNC pH probe
    Recommended for: Low ionic samples, medical and pharmaceutical research, biological samples, samples containing heavy metals
    Quick View

    SoliSense®

    Key Benefits
    • From 2 NTU to 8% Solids
    • Displays in NTU, mg/l, g/l or % solids – flexible
    • Auto-clean optical sensor – months without maintenance
    • Stable and reliable – excellent process control
    • Suitable for all potable, waste and process waters
    • Up to 12 months between maintenance
    • Up to 12 months between calibration
    The SoliSense® suspended solids sensor is available with different controllers giving you the same great performance with different communication, display, and control options. With the SoliSense® range of online suspended solids analyzers, you get everything that you need – and nothing that you don’t, without sacrificing the quality of measurement. The use of a single sensor to robustly and accurately measure a large dynamic range of suspended solids allows for:
    • Less spares – more commonality across a single or multiple sites
    • No requirement to know the range prior to specifying – easier purchasing
    • One online suspended solids analyzer can be:
      • Online mlss meter
      • Online tss meter
      • Online total suspended solids meter
      • Online effluent monitor
      • Online inlet monitor
      • Online ‘in process’ suspended solids analyzer
    Quick View

    SG-2110-RS Intelligent Specific Gravity Transmitter

    Applications
    Electronics industry Chemical industry
    Features
    1. Waterproof and dustproof design
    2. 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
    3. Measuring unit: SG/°Bé/ ppt/ %
    4. User-friendly operation with text and graphic illustration, clear signs and easy to understand
    5. Measuring value can be selected for figure or chart display
    6. Trace mode can display historical measured value curve from 3-minute to 4-week program
    7. Equipped with logbook function
    8. Large LCM display with auto-sense backlight and contrast setting function
    9. Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
    10. Cell constant, Pure water, Known solution— 3 types calibration
    11. Simultaneous display of measurement value and temperature
    12. Automatic temperature compensation for setting
    13. Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
    14. Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
    15. With password and multi-key design, enhanced security protection
    16. LED indicated alarm
    17. IP 65 (NEMA 4X)
    Specific Gravity Sensor
    Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas design
    Quick View

    S272CD Online Process pH Sensor

    Product Description
    The S272CD online process pH sensor delivers reliable online monitoring for in-line or submersion installation configuration. This sensor is designed to extend sensor lifetime with double-junction technology. Minimal maintenance required due to flat glass measurement surface. A versatile sensor for moderate and multi-purpose applications.
    • Reliable performance in demanding applications: Liquid flow naturally cleans the flat pH measurement surface
    • Extended sensor lifetime: Double junction technology extends sensor lifetime by preventing reference contamination
    • Versatile design for many applications: 3/4″ NPT threads on both ends for submersion or in-line mounting
    • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
    Quick View

    ORP2000 Extended Life ORP Sensor

    Product Description
    When measuring samples such as wastewaster that may contain proteins, heavy metals, or other contaminants, it is important to use an ORP sensor (REDOX sensor) designed to withstand unpredictable chemical environments. The ORP2000 features double junction reference protection, which prevents contamination by sample components that interact with silver (Ag). The durable Ultem® body ensures extensive chemical compatibility, making the ORP2000 a highly versatile analytical tool.
    • Virtually unbreakable with durable Ultem® body construction and recessed protected glass
    • Reliable and accurate ORP / REDOX measurements
    • No refilling or maintenance required with sealed gel-filled design
    • Instantly ready for use and shipped in storage bottle for long shelf life – guaranteed for one year
    • One year limited warranty
    Quick View

    PC-100 pH/ORP Panel Meter

    The PC-100 pH/ORP monitors utilize microprocessor technology to provide you enhanced capabilities with economical price. The compact design fits in small space installation. The PC-100 features for sample monitoring.
    Applications
    Water treatment Pure water System Clean room Wastewater treatment Scrubber Electronics process
    Features
    1. 48 x 96 mm Microprocessor pH/ORP Monitor & Controller
    2. Sensor slope performance diagnosis & error message
    3. User-friendly operation
    4. Automatic temperature compensation
    5. Compatible with Pt-1000 and NTC 30K temperature probe
    6. Isolated current output DC 0/4~20mA
    7. Gradually continuous sample measurements average function to enhance stability
    Quick View

    pH3400 Research Grade Glass pH Electrode

    Product Description
    In laboratory environments such as medical, biological, and materials science research groups, samples and test conditions are constantly changing, but accuracy is always critical. The pH3400 is a highly versatile glass combination pH electrode, specially designed to respond quickly and accurately to rapid temperature changes. The high sensitivity internals allow testing of low ionic samples. Safely measure samples containing heavy metals, TRIS buffer, or proteins thanks to the double junction reference design, which prevents fouling. Even test highly reactive chemicals: with a glass body, the pH3400 is inert to a wide range of chemical reactions.
    • Our most sensitive laboratory electrode: accurate to 0.04 pH in tests across full recommended temperature range
    • Easily maximize measurement repeatability: Rapid renew reference system for quick refilling
    • Safe for use with reactive chemicals: Glass bodies are inert to many chemical reactions
    • Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
    • Ready for wet or corrosive environments: BNC boot protects meter connection
    Recommended for: Low ionic samples, medical and pharmaceutical research, biological samples (including TRIS buffer), samples containing heavy metals
    Back to top