Accurate oil-water measurement is a function of velocity. In situations with low velocity or inconsistent flow velocities, proper mixing for accurate measurement is unattainable, making real-time, in-line water-cut metering almost impossible in some applications and difficult in most.
However, the unique design of the ML Measurement Loop creates a consistent measurement environment and a constant velocity above 7fps, regardless of application, water concentration, fluid viscosity, or temperature. This velocity ensures fluid homogeneity and consistent oil/water droplet size ratio, guaranteeing highly accurate, repeatable measurement with the OWD Water Cut Meter.
- Ensures compliance with API Chapter 8.2
- Consistent velocity
- Consistent droplet size ratio
- Consistent homogeneity
- Consistent accuracy
The KAM® OID™ Optical Interface Detector has been the preferred sensor for interface detection between refined products since its inception in 2000. Like eyes in the pipe, it provides accurate, real-time data on product interface even when density does not change between products, allowing operators to make cuts with confidence and significantly reduce product downgrade and/or transmix.
Fiber optics within the patented optical probe respond to the absorption, fluorescence, and refractive properties of the fluid, and the combined return signal is then turned into an “optical signature,” recognizing qualitative changes in pipeline fluids.
The OID is designed for minimal maintenance and ongoing ease of use. Long-lasting LED light sources ensure long-term, stable performance and minimal power consumption. All electronics are located in an explosion-proof enclosure directly on the end of the probe for a complete and compact unit with maximum installation flexibility.
Measurement is completely automatic and the output signal can be sent to the SCADA, PLC’s, or to a Central Control Room.
- Detects the interface of specialty fuels such as ULSD (Ultra-Low Sulfur Diesel)
- Electronics are housed directly on the atmospheric end of the probe
- No moving parts
- Insertable model installs without having to drain the pipe
- Uses LED's for long-term performance with minimal power and maintenance requirements
- Lenses do not require cleaning
Ideal for turbidity or haze detection at pipeline terminals, refineries, airports, and more, the KAM THA Turbidity Haze Analyzer alerts operators to the presence of water or particulate contamination in all refined fuels and helps them to determine the source of contamination. The THA is based on the KAM CHA’s proven turbidity detection technology, already in operation throughout the United States, Asia and Europe.
Real-time turbidity / haze data can be used for ongoing quality control in all refined fuels including diesel, jet fuel, and gasoline. This data provides pipeline operators with the intelligence required to monitor fuels at both receiving and delivery terminals reject non-comforming batches and assists multiple parties in determining the location and/or responsibility of water contamination. In addition, the THA provides refineries quality control data prior to distribution and allows refiners to monitor and optimize the performance of filters, coalescers and separators.
Like all KAM instruments, the THA is easily installed either by inserting directly into the pipe, or in an analyzer loop. It can be installed without having to ever drain the pipe and output is a basic 4-20 mA. With no moving parts and long-lasting LED’s, the THA is designed for minimal power usage, minimal maintenance and long life.
- Proven technology
- Does not require calibration
- Inserts into the pipeline without having to drain the pipe
- No moving parts
- Long-lasting LED with minimal power consumption
Tank dewatering is vital for maximizing crude oil storage and minimizing tank corrosion, but manual operations can be costly in terms of inaccuracy, manpower and environmental liabilities. The ATD Automated Tank Dewatering system ensures maximum storage efficiency without the danger of hydrocarbons contaminating the draw-off line.
Sold as a complete system or as individual units that users can connect to an existing PLC, the ATD uses two microwave probes to monitor water levels in the tank. Communicating with a PLC, the system controls an MOV (motor operated valve) on the draw off line–opening when water levels rise, and closing when the emulsion layer has descended to the bottom of the tank.
The KAM ATD probe is also unique in its solid body design, preventing the accumulation of paraffin or other contaminants on the probe which prevent the probe from accurately registering rising water levels.
- Solid antenna design prevents tank debris from clogging probe
- Inserts directly into the tank without the need to drain the tank
- All requisite electronics for probes housed within unit and included in unit price
Easy to use and fully automatic, KAM KF Karl Fischer Moisture Analyzers make the determination of oil/water content in crude oils extremely simple, fast and accurate. Whether you are using it in the lab or the field, the KAM KF is specially designed for oil-industry applications with a rugged exterior, extra storage and convenience all in mind.
In most cases, KAM moisture analyzers process samples in less than five minutes, accurately determining the water content in crude oil samples for all custody transfer operations: production, pipeline, marine, or truck. They can also be used to analyze refined products, transformer oils, jet fuels, chemicals, and most other liquids.
- Fully automatic operation
- Automatic reagent expiration notification
- Graphic LCD digital display
- Bluetooth connection
- Windows based software
- USB port
- Bluetooth connection
- Battery life indicator
- Printer (Optional)
- Portable unit
- Storage for all consumables
With 1% of full scale accuracy regardless of range, the rugged OWD Water Cut Meter is the ideal instrument for monitoring water concentrations in a variety of applications from production to refinery. The OWD offers continuous, real-time, water cut data.
Unlike other water-cut meters, the OWD’s patented multi-antenna design reads both oil continuous and water continuous modes simultaneously and automatically transitions between the two. The result is measurement over a true 0-100% range. Water-cut measurement is fully automatic with no need for operator intervention or supervision.
The OWD also uses internal references to auto calibrate for drift caused by temperature changes of the electronics, the aging of the electronics components, fluid pressure, and fluid temperature.
The simplicity of design and quality of engineering employed in the OWD Water Cut Meter mean there are no moving parts. The output signal can be sent to Flow Computers, SCADA, PLC’s or to a Central Control Room for logging or display on chart recorders or monitors.
- Full 0-100% range
- Automatic temperature correction
- 1% of full scale accuracy
- All requisite electronics housed within unit (can also be mounted remotely) and included in unit price
- No salinity offset required
The highly efficient SMS Static Mixing Spool creates a homogenous flow within your pipeline, ensuring accurate sampling and water cut measurement. Not only does the Static Mixing Spool require no outside energy source, but through its unique design it achieves turbulent flow at a much lower Reynolds number than other conventional static mixers.
The spool is composed of a fixed arrangement of positive and negative members which simultaneously create cross-current mixing for increased turbulence and mixing. Because the SMS spool is so efficient, you can create a homogenous mixture with a very short spool. Often as few as two members.
- Low pressure drop
- Simple and rugged
- No moving parts
- Uniform density
- Uniform temperature
- Minimal operating cost
Product DescriptionCustomized to fit each application, the Complete Sampling System includes one of our patented mixing elements to ensure homogeneity, a flow meter, an IAS Isokinetic Automatic Sampler, a Sampler Controller, a Sample Receiver, a Meterizer or Weight Scale, and a Circulating Sample Mixer. The system is fully compliant with API MPMS Chapter 8.2/ASTM D4177 and ISO 3171. Based on a downhole pump design, the IAS Isokinetic Automatic Sampler features the simplest design in the industry and is the ideal instrument for pipeline sampling during custody transfer, marine unloading, lightering, etc. The IAS sampler’s high degree of accuracy and simplicity facilitate extracting a representative sample, regardless of viscosity, pressure, or flow rate. Working with the SC Sampler Controller, the IAS sampler easily extracts a representative sample from your pipeline into an SR Sample Receiver. With a CSM Circulating Sample Mixer, you may then mix and analyze the sample for custody transfer, API gravity measurements, shrinkage, chemical composition, etc.
- Patented microwave resonance technology
- AnyDensity™ density compensation for full API gravity range
- Highest accuracy available (0.03%)
- Automatic temperature correction
- Spool and insertable models available for maximum installation flexibility
- Real-time continuous water percentage
- Local display
- Up to ANSI 900
- Easily field calibrated
The ideal solution for oil-in-water detection, the KAM OOD Optical Oil Detector offers unmatched simplicity and pinpoint accuracy in an in-line meter. The OOD allows operators to monitor produced water and wastewater streams for the presence of hydrocarbons in a variety of applications, providing continuous, real-time data with a range of 0-500 ppm. Fiber optics within the optical probe respond to the fluorescence and absorption in the fluid to detect the presence and quantity of hydrocarbons in water. The combined data is translated as voltage on a 4-20 mA output.
The simplicity of design and quality of engineering employed in the KAM® OOD™ mean there are no moving parts. Using long-lasting LED light sources ensures long-term, stable performance with limited maintenance and power requirements. In addition, locating the electronics within an explosion-proof enclosure directly on the atmospheric end of the optical probe creates a complete and compact unit with maximum installation flexibility.
Measurement is completely automatic without the need for operator intervention or supervision, and the output signal can be sent to the SCADA, PLC’s, or to a Central Control Room for logging or display on chart recorders or monitors.
- Optic design minimizes effects of temperature / density / salinity
- LED's for long-term performance with minimal power and maintenance requirements
- No moving parts for limited maintenance
- Insertable type for routinely cleaning lens without having to shut down
- Output can be sent to SCADA, PLC, etc.