pH2000 Extended Life Laboratory Plastic pH Sensor 
THM Monitor & Analyser 
pH3400 Research Grade Glass pH Electrode 
iMAG 4700r Remote Display Flanged In-line Magmeter 
ORPSense Related Products
Quick View
ORPSense
Key Benefits
The ORPSense range of ORP Meters from Pi utilize the very latest and best ORP sensors available in the world today for measuring the online Redox potential of any aqueous solution. They are platinum ball based sensors with integral reference electrodes which use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs. Online ORP meters and ORP controllers are one of the most common analyzers in use today in water treatment and process plants and yet online ORP meters cause continual problems for their operators. What is needed is a stable, reliable, online ORP meter for a reasonable cost. That is exactly what you get with the ORPSense and the ORPSense Automatic Calibrator. The ORPSense sensors and flow cells are available with different controllers giving you the same great performance with different communication, display, and control options. With the ORPSense range of ORP meters, you get everything that you need – and nothing that you don’t.-
Stable and reliable ORP meter
On board diagnostics
Low purchase cost
Long life ORP sensors
Remote access and SMS text alarms
PID and other process controls
Quick View
SG-2110-RS Intelligent Specific Gravity Transmitter
Applications
Electronics industry Chemical industryFeatures
- Waterproof and dustproof design
- 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
- Measuring unit: SG/°Bé/ ppt/ %
- User-friendly operation with text and graphic illustration, clear signs and easy to understand
- Measuring value can be selected for figure or chart display
- Trace mode can display historical measured value curve from 3-minute to 4-week program
- Equipped with logbook function
- Large LCM display with auto-sense backlight and contrast setting function
- Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
- Cell constant, Pure water, Known solution— 3 types calibration
- Simultaneous display of measurement value and temperature
- Automatic temperature compensation for setting
- Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
- Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
- With password and multi-key design, enhanced security protection
- LED indicated alarm
- IP 65 (NEMA 4X)
Specific Gravity Sensor
Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas design
Quick View
pH1000 Polycarbonate Laboratory Plastic pH Sensor
Product Description
Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. This low maintenance, low cost pH sensor provides reliable readings in a range of environments, from greenhouses to science classrooms. This sensor stands up to the usual wear and tear with its durable polycarbonate body and built-in protection for the pH glass measuring surface. Compatible with all pH meters accepting a BNC connector.- Very fast response time: Platinum measurement surface for fast response time and stable readings
- No maintenance required: Sealed, no maintenance reference design
- Durable construction: Polycarbonate body is built for frequent lab or field use
- Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Quick View
pH3000 Research-Grade Plastic pH Sensor (Refillable)
Product Description
When accuracy and repeatability are critical, such as in pharmaceutical or drinking water applications, the ideal pH electrode will quickly deliver stable measurements. The pH3000 is a research grade pH meter replacement probe specially designed to respond quickly and accurately to rapid temperature changes. The high sensitivity internals also make these electrodes the best choice for low ionic samples. The double junction reference design prevents contamination, allowing pH testing in samples containing heavy metals, proteins and enzymes, or TRIS buffer.- Our most sensitive laboratory electrode: accurate to 0.04 pH in tests across full recommended temperature range
- Easily maximize measurement repeatability: Rapid renew reference system for quick refilling
- Extensive chemical compatibility: Constructed with durable Ultem®, proven in a range of chemical conditions
- Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
- Virtually unbreakable: removable bulb guard protects pH glass and strain relief prevents damage to cable connection
- Ready for wet or corrosive environments: BNC boot protects meter connection
- Compatible with various meters: Versatile replacement probe works with any meter accepting a BNC pH probe
Quick View
HaloSense Zero
Key Benefits
Many water companies want to measure free chlorine residuals without the need for chemical buffers traditionally associated with such measurements. Acetate and phosphate buffers are expensive and environmentally unfriendly. Buffer delivery systems are maintenance intensive and have fairly costly consumables and there are health and safety considerations in the handling of the acids and high disposal costs if the acid treated water is unable to be fed back into the water supply. Amperometric cells and most polarographic probes only respond to hypochlorous acid, (HOCl). HOCl dissociates into hypochlorite (OCl–) in a pH dependent manner. This is why most chlorine monitors need acid buffers in most applications. The typical pH of water measured on a water treatment works may range from 7 to 9.2. Chemical buffering reduces the pH to between 5 and 6 and ensures that the majority of the residual chlorine is present as HOCl (see graph below).- Low purchase cost
- Low cost of ownership
- Reduced pH dependency (largely pH independent)
- Stable and reliable
- Bufferless
- Reagentless
Quick View
ConductiSense
The ConductiSense range of online conductivity meters from Pi utilize the very latest and best conductivity sensors available in the world today for measuring the online conductivity of any aqueous solution.
Online conductivity meters are common in today’s water treatment and process plants. ConductiSense is a stable, reliable, online conductivity meter for a reasonable cost.
The ConductiSense sensors and accessories are available with different controllers giving you the same great performance with different communication, display, and control options. With the ConductiSense range of Conductivity Monitors, you get everything that you need – and nothing that you don’t.
Key Benefits
- Resists coating, corrosion and fouling
- Durable Noryl (plastic) construction
- Easy installation
- Low purchase cost
- Custom tee for in-line mounting
Quick View
AquaSense
Swimming pools and spas use chlorine as a disinfectant and so use an analyzer to control the amount of chlorine that gets dosed. The AquaSense Swimming Pool Controller and Spa Controller measures the pool chlorine levels and the pH of the pool and then controls the chlorine and pH levels by controlling the chemical dosing. The AquaSense offers bufferless and reagentless operation and is suitable for commercial, municipal and community swimming pools.
The AquaSense has been designed to three criteria:
- Improved Safety – better sensors lead to better process control which leads to less variation in chlorine residuals even with highly variable bathing load.
- Improved Control – better process control leads to reduced chemical usage, lower costs and an improved bathing experience.
- Reduced Costs – lower chemical costs, less expensive controllers, inverter control leading to hugely reduced electrical usage costs are just a few of the ways that the AquaSense can save you money which can pay for a new controller in just a few months.
Key Benefits
- Inverter control for massive electricity and CO2 savings
- Stable and reliable residual chlorine and pH measurement and control
- Low purchase cost
- Low cost of ownership
- SMS text alarms
- Remote access via Internet
- Suitable for fresh water, salt water and outdoor pools with cyanuric acid
- Private label option for re-sellers
- Other inputs to data log and alarms
Quick View
UV254Sense
Key Benefits
Standard Features
Quick View
ORP3000 Research Grade ORP Electrode
Product Description
In harsh laboratory or field conditions, where heat, moisture, or corrosive chemicals may damage equipment, ORP electrode durability is key. The ORP3000 is durable, research grade ORP electrode. All the functional components – the ORP measurement surface, the meter connection, and the cable connection – are reinforced with protective elements. Durable Ultem® body construction provides extensive chemical compatibility and withstands temperatures up to 100°C.- Virtually unbreakable: removable guard protects ORP measurement surface and strain relief prevents damage to cable connection
- Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
- No maintenance required: Sealed gel reference design does not require users to refill solution
- Extensive chemical compatibility: Constructed with durable Ultem®, proven in a range of chemical conditions
- Ready for wet or corrosive environments: BNC boot protects meter connection
Quick View
FT520 Batch Flow Processor
Product Description
The FT500-Series is a batching flow processor with additional output controls. It is designed for use with Seametrics flow meters and flow sensors, as well as other manufacturer’s products which have frequency output proportional to flow. In addition to batch functions, the FT500- Series indicates flow rate, and other data in large 3/8” (9.66 mm) digits on an easily-read, backlit display. Units of measure are user selectable, and range from milliliters per second to millions of gallons per day. The unit can be 110 Vac powered with a standard 3-wire cord (included), 220 Vac powered (optional), or DC powered through an internal terminal strip. An analog output of 4-20 mA is available both in active and passive loop configuration, and in 0-5 Vdc or 0-10 Vdc outputs, and can be used in applications such as flow rate logging. Two programmable pulse scaled outputs are also standard, and can be used, for example, to provide proportional chemical feed with a pulse-responsive metering pump. The housing is supplied with two brackets for wall-mount applications, or the top/bottom housings can be easily separated and reassembled for panel-mount.- Large backlit alphanumeric display
- Built-in 4-20 mA analog output
- User-scaled pulse output for chemical metering pumps or telemetry
- Two relay outputs for staged shutoff (batching) or dual setpoints (alarm option)
- Rugged cast aluminum housing
- Wall or panel mounting