Navigation

Related Products

Quick View

AquaSense

Swimming pools and spas use chlorine as a disinfectant and so use an analyzer to control the amount of chlorine that gets dosed. The AquaSense Swimming Pool Controller and Spa Controller measures the pool chlorine levels and the pH of the pool and then controls the chlorine and pH levels by controlling the chemical dosing. The AquaSense offers bufferless and reagentless operation and is suitable for commercial, municipal and community swimming pools. The AquaSense has been designed to three criteria:
  • Improved Safety – better sensors lead to better process control which leads to less variation in chlorine residuals even with highly variable bathing load.
  • Improved Control – better process control leads to reduced chemical usage, lower costs and an improved bathing experience.
  • Reduced Costs – lower chemical costs, less expensive controllers, inverter control leading to hugely reduced electrical usage costs are just a few of the ways that the AquaSense can save you money which can pay for a new controller in just a few months.
Key Benefits
  • Inverter control for massive electricity and CO2 savings
  • Stable and reliable residual chlorine and pH measurement and control
  • Low purchase cost
  • Low cost of ownership
  • SMS text alarms
  • Remote access via Internet
  • Suitable for fresh water, salt water and outdoor pools with cyanuric acid
  • Private label option for re-sellers
  • Other inputs to data log and alarms
Quick View

FluoriSense

Key Benefits
Pi’s FluoriSense range of fluoride monitors and fluoride analyzers utilize the very latest and best fluoride sensors available in the world today for measuring the online fluoride content of any potable water. They are ion selective electrodes (ISEs) with integral reference, automatic temperature compensation and solid polymeric junction. which use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs.
  • Measuring method: ISE (Ion Specific Electrode)
  • Measure range: 0.02 ppm saturation
  • Sample pH range: 5 to 7 pH at 1 x 10⁻⁶ M / 5 to 11 pH at saturation
  • Temperature range: 0 to 80°C continuous / 80 to 100°C intermittent
  • Electrode resistance: less than 50 MΩ
  • Reproducibility: ±2%
  • Cable length: 100cm
  • Calibration: Manual using test kit
  • No reagent required
Quick View

SoliSense®

Key Benefits
  • From 2 NTU to 8% Solids
  • Displays in NTU, mg/l, g/l or % solids – flexible
  • Auto-clean optical sensor – months without maintenance
  • Stable and reliable – excellent process control
  • Suitable for all potable, waste and process waters
  • Up to 12 months between maintenance
  • Up to 12 months between calibration
The SoliSense® suspended solids sensor is available with different controllers giving you the same great performance with different communication, display, and control options. With the SoliSense® range of online suspended solids analyzers, you get everything that you need – and nothing that you don’t, without sacrificing the quality of measurement. The use of a single sensor to robustly and accurately measure a large dynamic range of suspended solids allows for:
  • Less spares – more commonality across a single or multiple sites
  • No requirement to know the range prior to specifying – easier purchasing
  • One online suspended solids analyzer can be:
    • Online mlss meter
    • Online tss meter
    • Online total suspended solids meter
    • Online effluent monitor
    • Online inlet monitor
    • Online ‘in process’ suspended solids analyzer
Quick View

pH2400 Extended Life Glass pH Electrode

Product Description
Environmental, wastewater, and other sampling applications may expose electrodes to unknown contaminants. Over time, exposure to contaminants such as heavy metals and reactive chemicals, will take a toll on a sensor’s functional components. The best sensors for these types of applications are built to safely handle contaminants to maximize working lifetime. Our pH2400 is a glass electrode with double junction reference design to prevent fouling by sample contaminants that interact with Silver (Ag). The refillable reference junction allows users to replace the liquid fill solution as it becomes depleted or contaminated, instead of replacing the whole sensor.
  • Accurate measurements across full pH scale (0-14)
  • Maximum chemical compatibility: glass electrode bodies are inert to most reactions
  • Extended lifetime: Refillable reference junction allows sensor maintenance, saving replacement costs
  • Great for wet or corrosive environments: BNC boot protects meter connection
  • Compatible with any meter accepting BNC
  • Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
  • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Quick View

PC-110 pH/ORP Panel Meter

Compact and Pragmatic
The PC-110 pH/ORP monitors utilize microprocessor technology to provide you enhanced capabilities with economical price. The compact design fits in small space installaion. The PC-100 features for sample monitoring and the PC-110 offers one relay output to sufficiently activate your process system.
Applications
Water treatment Pure water System Clean room Wastewater treatment Scrubber Electronics process
Features
  1. 48 x 96 mm Microprocessor pH/ORP Monitor & Controller
  2. Sensor slope performance diagnosis & error message
  3. User-friendly operation
  4. Automatic temperature compensation
  5. Compatible with Pt-1000 and NTC 30K temperature probe
  6. Isolated current output DC 0/4~20mA
  7. Gradually continuous sample measurements average function to enhance stability
  8. PC-110 offers one relay contact output, one set point with programmable hysteresis function
Quick View

SG-2110-RS Intelligent Specific Gravity Transmitter

Applications
Electronics industry Chemical industry
Features
  1. Waterproof and dustproof design
  2. 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
  3. Measuring unit: SG/°Bé/ ppt/ %
  4. User-friendly operation with text and graphic illustration, clear signs and easy to understand
  5. Measuring value can be selected for figure or chart display
  6. Trace mode can display historical measured value curve from 3-minute to 4-week program
  7. Equipped with logbook function
  8. Large LCM display with auto-sense backlight and contrast setting function
  9. Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
  10. Cell constant, Pure water, Known solution— 3 types calibration
  11. Simultaneous display of measurement value and temperature
  12. Automatic temperature compensation for setting
  13. Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
  14. Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
  15. With password and multi-key design, enhanced security protection
  16. LED indicated alarm
  17. IP 65 (NEMA 4X)
Specific Gravity Sensor
Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas design
Quick View

pH2100 Flat Tip Plastic pH Electrode

Product Description
Agar plates, skin, and electrophoresis gels are all surfaces that may be difficult to measure with a typical pH glass bulb due to concerns about breakage. To facilitate these and other surface measurements, we created the pH2100 flat tip pH electrode. It has a rugged flat measurement surface, which breaks less easily when it comes in contact with hard materials. This makes it a great choice for measuring slurries, sludges, and viscous samples as well as those containing suspended solids.
  • Ideal for surface measurements and slurries: rugged flat measurement tip resists breakage
  • Great for testing unknown sample types: double junction electrode reference design prevents contamination
  • Durable and Versatile: Ultem® body offers enhanced chemical compatibility and booted BNC protects meter connection
  • No maintenance required: sealed gel filled reference design
  • One year limited warranty: We stand by our products with the Sensorex guarantee
Quick View

pHSense

The pHSense range of online pH meters from Pi utilize the very latest and best pH sensors available in the world today for measuring the online pH of any aqueous solution. They are patented gel filled sensors with integral reference which uses no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs. The junction, usually the source of error with current pH sensor technology is made from an electrochemically active solid resulting in a more robust pH sensor. Online pH meters and pH controllers are one of the most common analyzers in use today in water treatment and process plants and yet online pH meters cause continual problems for their operators. What is needed is a stable, reliable, online pH meter for a reasonable cost. That is exactly what you get with the pHSense. The pHSense sensors and flow cells are available with different controllers giving you the same great performance with different communication, display, and control options. With the pHSense range of online pH meters, you get everything that you need – and nothing that you don’t.
Key Benefits
Stable and reliable online pH meter On board diagnostics Auto calibrant recognition Low purchase cost Long life pH sensors Remote access and SMS text alarms
Quick View

StreamerSense

Key Benefits
  • Immediate response to process changes in coagulation treatment – coagulation monitor
  • Maintain high quality finished water through improved coagulation control –coagulation controller
  • Reduce coagulant/polymer costs – coagulant analyzer
  • Automate dosing coagulant/polymer dosing using the streaming current monitor –coagulant control
  • Ensure coagulation reliability – coagulant analyzer
  • Improve operator efficiency – coagulant analyzer
  • Improve filter performance and coagulation treatment – coagulation controller
  • Monitor your coagulation control process – coagulation monitor
Streaming Current Monitors Standard Features
  • Patented sensor design
  • Quick replacement probe and piston
  • Self-diagnostic sensor
  • High-volume flow minimizes sensor fouling
  • Removes electronics from harsh environments
  • Corrosion-free Nema 4x enclosure (IP65)
  • Optional computer interface
  • Spare probe cartridge and piston included
  • Auxiliary input signals
Quick View

S272CD Online Process pH Sensor

Product Description
The S272CD online process pH sensor delivers reliable online monitoring for in-line or submersion installation configuration. This sensor is designed to extend sensor lifetime with double-junction technology. Minimal maintenance required due to flat glass measurement surface. A versatile sensor for moderate and multi-purpose applications.
  • Reliable performance in demanding applications: Liquid flow naturally cleans the flat pH measurement surface
  • Extended sensor lifetime: Double junction technology extends sensor lifetime by preventing reference contamination
  • Versatile design for many applications: 3/4″ NPT threads on both ends for submersion or in-line mounting
  • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Back to top