Navigation

Beer Brewery Analysers – 9100 Series

‹Return to Previous Page

Related Products

Quick View

SG-2110-RS Intelligent Specific Gravity Transmitter

Applications
Electronics industry Chemical industry
Features
  1. Waterproof and dustproof design
  2. 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
  3. Measuring unit: SG/°Bé/ ppt/ %
  4. User-friendly operation with text and graphic illustration, clear signs and easy to understand
  5. Measuring value can be selected for figure or chart display
  6. Trace mode can display historical measured value curve from 3-minute to 4-week program
  7. Equipped with logbook function
  8. Large LCM display with auto-sense backlight and contrast setting function
  9. Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
  10. Cell constant, Pure water, Known solution— 3 types calibration
  11. Simultaneous display of measurement value and temperature
  12. Automatic temperature compensation for setting
  13. Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
  14. Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
  15. With password and multi-key design, enhanced security protection
  16. LED indicated alarm
  17. IP 65 (NEMA 4X)
Specific Gravity Sensor
Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas design
Quick View

SoliSense®

Key Benefits
  • From 2 NTU to 8% Solids
  • Displays in NTU, mg/l, g/l or % solids – flexible
  • Auto-clean optical sensor – months without maintenance
  • Stable and reliable – excellent process control
  • Suitable for all potable, waste and process waters
  • Up to 12 months between maintenance
  • Up to 12 months between calibration
The SoliSense® suspended solids sensor is available with different controllers giving you the same great performance with different communication, display, and control options. With the SoliSense® range of online suspended solids analyzers, you get everything that you need – and nothing that you don’t, without sacrificing the quality of measurement. The use of a single sensor to robustly and accurately measure a large dynamic range of suspended solids allows for:
  • Less spares – more commonality across a single or multiple sites
  • No requirement to know the range prior to specifying – easier purchasing
  • One online suspended solids analyzer can be:
    • Online mlss meter
    • Online tss meter
    • Online total suspended solids meter
    • Online effluent monitor
    • Online inlet monitor
    • Online ‘in process’ suspended solids analyzer
Quick View

pH2000 Extended Life Laboratory Plastic pH Sensor

Product Description
Applications such as environmental and wastewater sampling involve some uncertainty about what samples may contain. When dealing with unknown or unpredictable sample types, you need a durable pH probe you can trust to deliver accurate measurements regardless of the contaminants you encounter. The pH2000 has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants. When you travel to remote sites to collect data, it is especially important that obtaining the measurements you need is hassle free. The pH2000 features an Ultem® body and a booted meter connection for durability in the field. The sealed reference design requires no maintenance. Compatible with any meter accepting a BNC connector.
  • Durable and low maintenance: Ultem® body construction, reinforced meter connection, and sealed reference design
  • Great for testing unknown sample types: Double junction reference protection prevents reference cell contamination
  • Accurate measurements across full pH scale (0-14)
  • Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
  • Compatible with any meter accepting a BNC connector
  • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Quick View

ConductiSense

The ConductiSense range of online conductivity meters from Pi utilize the very latest and best conductivity sensors available in the world today for measuring the online conductivity of any aqueous solution. Online conductivity meters are common in today’s water treatment and process plants. ConductiSense is a stable, reliable, online conductivity meter for a reasonable cost. The ConductiSense sensors and accessories are available with different controllers giving you the same great performance with different communication, display, and control options. With the ConductiSense range of Conductivity Monitors, you get everything that you need – and nothing that you don’t.
Key Benefits
  • Resists coating, corrosion and fouling
  • Durable Noryl (plastic) construction
  • Easy installation
  • Low purchase cost
  • Custom tee for in-line mounting
Quick View

OzoSense

The OzoSense Online Dissolved Ozone Monitor from Pi for the measurement of the ozone concentration in water, is designed to be simple to install and operate, and offers unrivalled stability, accuracy and precision, whilst offering excellent value for money. The OzoSense range of online dissolved ozone analyzers and dissolved ozone monitors utilize the very latest and best ozone sensors available in the world today. There are two sensors in the OzoSense range. The first is a membraned device which is insensitive to changing pH, uses no reagents, is extremely stable, and has reduced maintenance and reduced whole life costs. The second is a non membraned three electrode sensor, that can operate at higher temperatures and pressures.
Key Benefits
  • Stable and reliable – excellent ozone process control – ozone controllers
  • Suitable for all potable, process and salt waters – ozone monitor – ozone analyzer
  • Up to 6 months between maintenance
  • Up to 3 months between calibration
  • Does not respond to residual chlorine (OzoSense M)
  • Resistant to detergents in the water
  • Up to 70°C (OzoSense NM)
  • Onboard PID controls – dissolved ozone Controller
  • Onboard data logging and graphing capability
  • Onboard comms such as TCP/IP, Modbus, Profibus and more.
Quick View

UV254Sense

Key Benefits
  • UVA (ultra-violet absorbance) is an excellent surrogate parameter for TOC, DOC, COD and color.
  • UVT (ultra-violet transmission) allows for the calculation of optimal UV dose for disinfection systems, improving efficiency.
  • Accurate detection without the cost of reagents.
  • Few ongoing service or maintenance requirements.
  • Allows feed forward optimization of coagulation control, resulting in decreases in chemical consumption, reduction in sludge removal costs and minimization of DBP formation potential.
  • Strong ROI with pay back on the analyzer being seen by many customers within a few months.
  • UVA measurement ensures performance of various contaminant removal technologies such as membranes (RO, NF, UF), ion exchange (nitrates and TOC removal) and granular activated carbon (GAC).
  • Real time UVA analyzers can provide a final check of effluent water quality and can alarm an operator in case of non-compliance.
  • A UVA monitor can monitor the percentage removal of organics across any treatment system.
  • Can be combined with a CRONOS® or CRIUS® for a multi-parameter UV254 analyzer solution that suits your needs.
  • Standard Features
  • Online continuous operation
  • Patent pending Ortho-Beam technology
  • 254nm wavelength UV light source
  • Displays UV transmittance or absorbance values
  • Quick View

    pH2500 Flat Surface Glass pH Electrode

    Product Description
    Surfaces like paper, leather, electrophoresis gels and agar plates may be difficult to measure with traditional pH glass bulbs due to concerns about breakage. A flat electrode like our pH2500, is ideally suited for these types of pH measurements as well as measurements of suspended sludges and slurries. In addition to its specially designed measurement surface, the pH2500 features double junction construction, which prevents contamination and allows testing of samples containing heavy metals or proteins.
    • Perfect for gels and slurries: Flat electrode measurement surface designed for testing special sample types
    • Accurate measurements across full pH scale (0-14)
    • Highly adaptable: Compatible with any pH meter accepting BNC
    • Low maintenance: Gel-filled electrode reference design with double junction to prevent contamination
    • Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
    • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
    Quick View

    AquaSense

    Swimming pools and spas use chlorine as a disinfectant and so use an analyzer to control the amount of chlorine that gets dosed. The AquaSense Swimming Pool Controller and Spa Controller measures the pool chlorine levels and the pH of the pool and then controls the chlorine and pH levels by controlling the chemical dosing. The AquaSense offers bufferless and reagentless operation and is suitable for commercial, municipal and community swimming pools. The AquaSense has been designed to three criteria:
    • Improved Safety – better sensors lead to better process control which leads to less variation in chlorine residuals even with highly variable bathing load.
    • Improved Control – better process control leads to reduced chemical usage, lower costs and an improved bathing experience.
    • Reduced Costs – lower chemical costs, less expensive controllers, inverter control leading to hugely reduced electrical usage costs are just a few of the ways that the AquaSense can save you money which can pay for a new controller in just a few months.
    Key Benefits
    • Inverter control for massive electricity and CO2 savings
    • Stable and reliable residual chlorine and pH measurement and control
    • Low purchase cost
    • Low cost of ownership
    • SMS text alarms
    • Remote access via Internet
    • Suitable for fresh water, salt water and outdoor pools with cyanuric acid
    • Private label option for re-sellers
    • Other inputs to data log and alarms
    Quick View

    pH3000 Research-Grade Plastic pH Sensor (Refillable)

    Product Description
    When accuracy and repeatability are critical, such as in pharmaceutical or drinking water applications, the ideal pH electrode will quickly deliver stable measurements. The pH3000 is a research grade pH meter replacement probe specially designed to respond quickly and accurately to rapid temperature changes. The high sensitivity internals also make these electrodes the best choice for low ionic samples. The double junction reference design prevents contamination, allowing pH testing in samples containing heavy metals, proteins and enzymes, or TRIS buffer.
    • Our most sensitive laboratory electrode: accurate to 0.04 pH in tests across full recommended temperature range
    • Easily maximize measurement repeatability: Rapid renew reference system for quick refilling
    • Extensive chemical compatibility: Constructed with durable Ultem®, proven in a range of chemical conditions
    • Ideal for difficult sample types: Double junction reference protection for testing samples containing heavy metals, TRIS buffer, and other contaminants
    • Virtually unbreakable: removable bulb guard protects pH glass and strain relief prevents damage to cable connection
    • Ready for wet or corrosive environments: BNC boot protects meter connection
    • Compatible with various meters: Versatile replacement probe works with any meter accepting a BNC pH probe
    Recommended for: Low ionic samples, medical and pharmaceutical research, biological samples, samples containing heavy metals
    Quick View

    pH2100 Flat Tip Plastic pH Electrode

    Product Description
    Agar plates, skin, and electrophoresis gels are all surfaces that may be difficult to measure with a typical pH glass bulb due to concerns about breakage. To facilitate these and other surface measurements, we created the pH2100 flat tip pH electrode. It has a rugged flat measurement surface, which breaks less easily when it comes in contact with hard materials. This makes it a great choice for measuring slurries, sludges, and viscous samples as well as those containing suspended solids.
    • Ideal for surface measurements and slurries: rugged flat measurement tip resists breakage
    • Great for testing unknown sample types: double junction electrode reference design prevents contamination
    • Durable and Versatile: Ultem® body offers enhanced chemical compatibility and booted BNC protects meter connection
    • No maintenance required: sealed gel filled reference design
    • One year limited warranty: We stand by our products with the Sensorex guarantee
    Back to top